[missing-sync-winmobile-talk] Re: missing-sync-winmobile-talk
Digest, Vol 40, Issue 6
Brian M. Criscuolo
bcriscuolo at markspace.com
Mon May 8 05:05:52 PDT 2006
Hi Rob,
I asked for the results of this test a few weeks ago but didn't get
them. Please do this and send back the capture; it may contain the
answer to your connection issue:
1) Open Terminal
2) Type in
/usr/bin/sudo /usr/sbin/tcpdump -c 1000 -i ppp0 -s 0 -w ~/Desktop/
tcpdump_capture.dmp
3) enter your password
4) it will fail
5) Start a connection
6) In terminal, hit up arrow, and return so it tries to issue the
same command again
7) repeat step 6 until it doesn't fail.
8) Once the process fails, hit control C
9) send me the file "tcpdump_capture.dmp" which is on your Desktop.
Thanks,
b
On May 5, 2006, at 6:11 PM, Rob Williams wrote:
> still 2 dots then fade away with 10 and tmobile vario
> help please
> 5/5/06 23:08:55 Monitor: bt channel closed. channel=$3cc0c0
> _channel=3cc0c0
> 5/5/06 23:08:57 Monitor: bt channel opened. newChannel=3e47c0
> 5/5/06 23:08:58 Monitor: bt: finished relaying 1
> 5/5/06 23:08:58 Monitor: Reseting firewall: 5 (0x00000005)
> 5/5/06 23:08:58 Monitor: bt: deactivate check for sharing
> 5/5/06 23:08:58 Monitor: bt: killing pppd: pid 456
> 5/5/06 23:08:58 Listener: In cancel
> 5/5/06 23:08:58 Listener: asyncdserver setConnectedMonitor clear
> 5/5/06 23:08:58 Monitor: asyncd sent allowConnections: 1
> 5/5/06 23:08:58 Listener: Reset
> 5/5/06 23:08:58 Monitor: bt: MyCloseSerialPort succeeded :7
> 5/5/06 23:08:58 Monitor: bt: BSD path: /dev/cu.Bluetooth-PDA-Sync
> 5/5/06 23:09:00 Monitor: bt: MyOpenSerialPort succeeded :7
> 5/5/06 23:09:00 Monitor:
> ############################################################
> 5/5/06 23:09:00 Monitor: bt: data: CLIENT
> 5/5/06 23:09:00 Monitor: Connection status from 0 to 150
> 5/5/06 23:09:00 Monitor: bt: Device initialized successfully.
> 5/5/06 23:09:00 Monitor: bt: About to make connection
> 5/5/06 23:09:00 Monitor: Connection status from 150 to 175
> 5/5/06 23:09:00 Monitor: bt: forked pppd with pid: 490
> 5/5/06 23:09:00 Monitor: bt: activate check for sharing
> 5/5/06 23:09:00 Monitor: Firewall setup: 5
> 5/5/06 23:09:00 Monitor: Connection status from 175 to 200
> 5/5/06 23:09:00 Monitor: bt: Thread creation1 succeeded
> 5/5/06 23:09:00 Monitor: bt: Thread creation2 succeeded
>
> On 5 May 2006, at 20:02, missing-sync-winmobile-talk-
> request at lists.markspace.com wrote:
>
>> Send missing-sync-winmobile-talk mailing list submissions to
>> missing-sync-winmobile-talk at lists.markspace.com
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> http://lists.markspace.com/mailman/listinfo/missing-sync-
>> winmobile-talk
>>
>> or, via email, send a message with subject or body 'help' to
>> missing-sync-winmobile-talk-request at lists.markspace.com
>>
>> You can reach the person managing the list at
>> missing-sync-winmobile-talk-owner at lists.markspace.com
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of missing-sync-winmobile-talk digest..."
>>
>>
>> Today's Topics:
>>
>> 1. Re: MDA Pro - no sync (Peter Koch)
>> 2. Re: MDA Pro - no sync (Peter Koch)
>> 3. Re: MDA Pro - no sync (Brian M. Criscuolo)
>> 4. remove from mailing list. (Phil Wilson)
>>
>>
>> ---------------------------------------------------------------------
>> -
>>
>> Message: 1
>> Date: Thu, 4 May 2006 22:09:06 +0200
>> From: Peter Koch <koch at sachwert-ag.de>
>> Subject: Re: [missing-sync-winmobile-talk] MDA Pro - no sync
>> To: The Missing Sync for Windows Mobile Discussion List
>> <missing-sync-winmobile-talk at lists.markspace.com>
>> Message-ID: <A78B8CAE-7920-40CE-89B8-F0F64B5C59EA at sachwert-ag.de>
>> Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed
>>
>> Hi Brian
>>
>> - I disabled the password
>> - I have turned on Bluetooth connection in TMS
>>
>> Same result: 4 Points - message: device is coneecting ==> then it
>> stops, nothing more happend.
>>
>> Here the last lines in the protokoll:
>>
>> 5/4/06 22:02:55 Monitor: makeSureUIAppIsRunning
>> 5/4/06 22:02:55 Monitor: forgetDevice rraServer:0
>> 5/4/06 22:02:55 Monitor: setAsyncCallback
>> 5/4/06 22:02:55 Listener: asyncdserver setConnectedMonitor
>> 5/4/06 22:02:55 Listener: Socket successfully connected from
>> 192.168.206.206 1031.
>> 5/4/06 22:02:55 Monitor: bt: BSD path: /dev/cu.Bluetooth-PDA-Sync
>> 5/4/06 22:02:55 Listener: willDisconnectWithError
>> 5/4/06 22:02:55 Listener: Socket will disconnect. Error domain 0,
>> code 0 ((null)).
>> 5/4/06 22:02:56 Listener: in close
>> 5/4/06 22:02:56 Monitor: forgetDevice rraServer:0
>> 5/4/06 22:02:56 MSUI: disconnect
>> 5/4/06 22:02:56 Listener: asyncdserver setConnectedMonitor clear
>> 5/4/06 22:02:56 Monitor: asyncd sent allowConnections: 1
>> 5/4/06 22:02:56 Listener: reset
>> 5/4/06 22:02:57 Monitor: bt: MyOpenSerialPort succeeded :9
>>
>> Any more idea?
>>
>> Thanks
>> Peter
>>
>>
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Thu, 4 May 2006 22:32:50 +0200
>> From: Peter Koch <koch at sachwert-ag.de>
>> Subject: Re: [missing-sync-winmobile-talk] MDA Pro - no sync
>> To: The Missing Sync for Windows Mobile Discussion List
>> <missing-sync-winmobile-talk at lists.markspace.com>
>> Message-ID: <4146DE58-7889-4BAC-8717-757CAD839B8D at sachwert-ag.de>
>> Content-Type: text/plain; charset=ISO-8859-1; delsp=yes;
>> format=flowed
>>
>> Hi Brian,
>>
>> i tried Version 2.5.0 a10 (164).
>> Same result: transparent window disappears with 4 points -
>>
>> I´m working with a D-Link Bluetooth adapter at my iBook.
>> Is this a problem?
>>
>> Ciao
>> Peter
>>
>> Am 04.05.2006 um 22:09 schrieb Peter Koch:
>>
>>> Hi Brian
>>>
>>> - I disabled the password
>>> - I have turned on Bluetooth connection in TMS
>>>
>>> Same result: 4 Points - message: device is coneecting ==> then it
>>> stops, nothing more happend.
>>>
>>> Here the last lines in the protokoll:
>>>
>>> 5/4/06 22:02:55 Monitor: makeSureUIAppIsRunning
>>> 5/4/06 22:02:55 Monitor: forgetDevice rraServer:0
>>> 5/4/06 22:02:55 Monitor: setAsyncCallback
>>> 5/4/06 22:02:55 Listener: asyncdserver setConnectedMonitor
>>> 5/4/06 22:02:55 Listener: Socket successfully connected from
>>> 192.168.206.206 1031.
>>> 5/4/06 22:02:55 Monitor: bt: BSD path: /dev/cu.Bluetooth-PDA-Sync
>>> 5/4/06 22:02:55 Listener: willDisconnectWithError
>>> 5/4/06 22:02:55 Listener: Socket will disconnect. Error domain 0,
>>> code 0 ((null)).
>>> 5/4/06 22:02:56 Listener: in close
>>> 5/4/06 22:02:56 Monitor: forgetDevice rraServer:0
>>> 5/4/06 22:02:56 MSUI: disconnect
>>> 5/4/06 22:02:56 Listener: asyncdserver setConnectedMonitor clear
>>> 5/4/06 22:02:56 Monitor: asyncd sent allowConnections: 1
>>> 5/4/06 22:02:56 Listener: reset
>>> 5/4/06 22:02:57 Monitor: bt: MyOpenSerialPort succeeded :9
>>>
>>> Any more idea?
>>>
>>> Thanks
>>> Peter
>>>
>>> _______________________________________________
>>> missing-sync-winmobile-talk mailing list
>>> missing-sync-winmobile-talk at lists.markspace.com
>>> Subscription options and list archives can be found at:
>>> http://lists.markspace.com/mailman/listinfo/missing-sync-winmobile-
>>> talk
>>> To unsubscribe, send an email (no subject required) from your
>>> subscribed email address to:
>>> missing-sync-winmobile-talk-leave at lists.markspace.com
>>
>>
>>
>>
>> ------------------------------
>>
>> Message: 3
>> Date: Thu, 4 May 2006 22:47:56 -0400
>> From: "Brian M. Criscuolo" <bcriscuolo at markspace.com>
>> Subject: Re: [missing-sync-winmobile-talk] MDA Pro - no sync
>> To: The Missing Sync for Windows Mobile Discussion List
>> <missing-sync-winmobile-talk at lists.markspace.com>, Peter Koch
>> <koch at sachwert-ag.de>
>> Message-ID: <8583A882-9B72-46DA-A649-4459145C8FCC at markspace.com>
>> Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed
>>
>> Peter,
>>
>> I'm guessing that this is with the a10 build, correct?
>>
>> I have the same device, so it *should* connect just fine (mine is
>> pretty reliable.
>>
>> First, delete pairings from both the Mac and the MDA. Then, restart
>> your Mac and soft reset the device.
>>
>> Turn off GPRS and WiFi connections on the device. (Flight Mode)
>> Then, begin the pairing process from the device (starting in
>> ActiveSync - Connect via Bluetooth).
>> After pairing, try to connect in ActiveSync.
>>
>> Let me know what happens.
>>
>> b
>>
>> On May 4, 2006, at 4:09 PM, Peter Koch wrote:
>>
>>> Hi Brian
>>>
>>> - I disabled the password
>>> - I have turned on Bluetooth connection in TMS
>>>
>>> Same result: 4 Points - message: device is coneecting ==> then it
>>> stops, nothing more happend.
>>>
>>> Here the last lines in the protokoll:
>>>
>>> 5/4/06 22:02:55 Monitor: makeSureUIAppIsRunning
>>> 5/4/06 22:02:55 Monitor: forgetDevice rraServer:0
>>> 5/4/06 22:02:55 Monitor: setAsyncCallback
>>> 5/4/06 22:02:55 Listener: asyncdserver setConnectedMonitor
>>> 5/4/06 22:02:55 Listener: Socket successfully connected from
>>> 192.168.206.206 1031.
>>> 5/4/06 22:02:55 Monitor: bt: BSD path: /dev/cu.Bluetooth-PDA-Sync
>>> 5/4/06 22:02:55 Listener: willDisconnectWithError
>>> 5/4/06 22:02:55 Listener: Socket will disconnect. Error domain 0,
>>> code 0 ((null)).
>>> 5/4/06 22:02:56 Listener: in close
>>> 5/4/06 22:02:56 Monitor: forgetDevice rraServer:0
>>> 5/4/06 22:02:56 MSUI: disconnect
>>> 5/4/06 22:02:56 Listener: asyncdserver setConnectedMonitor clear
>>> 5/4/06 22:02:56 Monitor: asyncd sent allowConnections: 1
>>> 5/4/06 22:02:56 Listener: reset
>>> 5/4/06 22:02:57 Monitor: bt: MyOpenSerialPort succeeded :9
>>>
>>> Any more idea?
>>>
>>> Thanks
>>> Peter
>>>
>>> _______________________________________________
>>> missing-sync-winmobile-talk mailing list
>>> missing-sync-winmobile-talk at lists.markspace.com
>>> Subscription options and list archives can be found at:
>>> http://lists.markspace.com/mailman/listinfo/missing-sync-winmobile-
>>> talk
>>> To unsubscribe, send an email (no subject required) from your
>>> subscribed email address to:
>>> missing-sync-winmobile-talk-leave at lists.markspace.com
>>
>>
>> ********************
>> Brian M. Criscuolo
>> Senior Software Engineer
>> Mark/Space, Inc.
>> bcriscuolo at markspace.com
>> <http://www.markspace.com>
>>
>>
>>
>>
>>
>> ------------------------------
>>
>> Message: 4
>> Date: Fri, 5 May 2006 18:40:04 +0100
>> From: Phil Wilson <gasmangasservices at ntlworld.com>
>> Subject: [missing-sync-winmobile-talk] remove from mailing list.
>> To: missing-sync-winmobile-talk at lists.markspace.com
>> Message-ID: <B2F928FA-3EF5-425D-A110-16789FAE4DA1 at ntlworld.com>
>> Content-Type: text/plain; charset=US-ASCII; format=flowed
>>
>> Simple reply , to confirm that request, many thanks.
>>
>>
>> ------------------------------
>>
>> _______________________________________________
>> missing-sync-winmobile-talk mailing list
>> missing-sync-winmobile-talk at lists.markspace.com
>> Subscription options and list archives can be found at:
>> http://lists.markspace.com/mailman/listinfo/missing-sync-winmobile-
>> talk
>> To unsubscribe, send an email (no subject required) from your
>> subscribed email address to:
>> missing-sync-winmobile-talk-leave at lists.markspace.com
>>
>> End of missing-sync-winmobile-talk Digest, Vol 40, Issue 6
>> **********************************************************
>
> Rob Williams
> rob at williamscentral.org
>
>
>
> ---
> [This E-mail has been scanned for viruses but it is your
> responsibilityto maintain up to date anti virus software on the
> device that you are
> currently using to read this email. ]
>
>
> _______________________________________________
> missing-sync-winmobile-talk mailing list
> missing-sync-winmobile-talk at lists.markspace.com
> Subscription options and list archives can be found at:
> http://lists.markspace.com/mailman/listinfo/missing-sync-winmobile-
> talk
> To unsubscribe, send an email (no subject required) from your
> subscribed email address to:
> missing-sync-winmobile-talk-leave at lists.markspace.com
********************
Brian M. Criscuolo
Senior Software Engineer
Mark/Space, Inc.
bcriscuolo at markspace.com
<http://www.markspace.com>
More information about the missing-sync-winmobile-talk
mailing list