[missing-sync-winmobile-talk] Sync from a PDA-N

[Catherine Russell]

Hi Peter,

The PDA-N requires the USB Switch application so you can connect via  
Serial USB. Please refer to this useful information where you can  
also download a version of the USB Switch for your device. I  
downloaded and installed it today, after seeing only one dot for my  
USB connection.

http://www.palmsolo.com/2006/05/04/sync-your-windows-mobile-50-device- 
via-usb-on-your-mac/

Use Bluetooth to install the file or copy the file to an SD card and  
then insert that card in your PDA-N and open the file.

If you still cannot connect, after enabling the Serial connection in  
the USB Switch application, try turning off all connection types in  
The Missing Sync toolbar and then turning them back on. That worked  
for me.

Catherine

On Jul 17, 2006, at 4:14 PM, Peter Walker wrote:

> I am trying to use the beta (2.5.0 b2 (175)) to sync with an i-Mate  
> PDA-N.  It works via via a bluetooth connection, but won't work via  
> USB.
>
> When I plug the PDA-N into  the USB socket, I get one dot, which  
> stays for around a minute and then nothing.  The log reads:
>
> 7/18/06 09:12:52  Monitor:  Listener: closeCurrentDeviceConnection  
> 1, state=1
> 7/18/06 09:12:56  Monitor:  Connection status from 0 to 125
>
> Any idea what the problem is?
>
> Peter Walker
> _______________________________________________
> missing-sync-winmobile-talk mailing list
> missing-sync-winmobile-talk at lists.markspace.com
> Subscription options and list archives can be found at:
> http://lists.markspace.com/mailman/listinfo/missing-sync-winmobile- 
> talk
> To unsubscribe, send an email (no subject required) from your  
> subscribed email address to:
> missing-sync-winmobile-talk-leave at lists.markspace.com