[missing-sync-winmobile-talk] 2.0.2b6 Cannot connect to my PDA??????

[Ken Freeman]

What happens when you try to connect? Do you get the transparent like window
with a few icons and dots as the connection progresses? Do you only get two
dots and then nothing else?

Here are a few things to try.

1) Official 2.0.2 Release
The final 2.0.2 release was recently posted at
www.markspace.com/downloads.html.

2) Soft Reset your device

3) Make sure you are plugging the cable/cradle directly to the Mac and NOT a
usb hub or keyboard

4) Firewalls
If you have Apple's internal firewall on or any other firewall, open ports
5678 and 5679. For more information on this visit the KB article at
http://www.markspace.com/support/index.php?x=&mod_id=2&id=17

5) Internet Connection
Some people have reported problems connecting when they do NOT have an
active Internet connection. Try to connect when you are connected to the
Internet.

Ken


On 10/26/05 6:41 AM, "Robin Jackson" <robinjackson at mac.com> wrote:

> Hi
> 
> I last tried Missing Sync on 2.01 and an early beta because I have been very
> busy and could not afford to lose information again.
> 
> I updated my b2 to b6 and cannot get my PDA (a version of the i-mate PDA2K)
> to connect.
> 
> MS recognises I have connected a USB device but never fully connects.
> 
> Log file details below.
> 
> Any ideas?
> 
> Cheers.
> 
> Robin
> 
> 10/26/05 14:34:01  Monitor:
> ############################################################
> 10/26/05 14:34:01  Monitor:  usb: Found device 0xABCF, VID = 0x0BB4, PID =
> 0x0A05
> 10/26/05 14:34:01  Monitor:  usb: dealWithDevice: found 1 configurations
> 10/26/05 14:34:02  Monitor:  usb: found interface: 0xd26b
> 10/26/05 14:34:02  Monitor:  usb: dealWithInterface: found 2 pipes
> 10/26/05 14:34:02  Monitor:  usb: dealWithPipes
> 10/26/05 14:34:02  Monitor:  usb: dealWithPipes: grabbing BULK IN pipe index
> 1, number 1
> 10/26/05 14:34:02  Monitor:  usb: dealWithPipes: grabbing BULK OUT pipe
> index 2, number 2
> 10/26/05 14:34:02  Monitor:  usb: DeviceRequest 1 success
> 10/26/05 14:34:03  Monitor:  usb: ReadClient:  43 4C 49 45 4E 54
> CLIENT
> 10/26/05 14:34:03  Monitor:  Connection status from 0 to 100
> 10/26/05 14:34:03  Monitor:  usb: WriteClientServer:  43 4C 49 45 4E 54 53
> 45 52 56  CLIENTSERV
> 10/26/05 14:34:03  Monitor:  usb: WriteClientServer:  45 52
> ER
> 10/26/05 14:34:03  Monitor:  Connection status from 100 to 125
> 10/26/05 14:34:03  Monitor:  usb: forked pppd with pid: 851
> 10/26/05 14:34:03  Monitor:  usb: activateCheckForSharingPreferences
> 10/26/05 14:34:03  Listener:  In cancel
> 10/26/05 14:34:03  Listener:  asyncdserver setConnectedMonitor clear
> 10/26/05 14:34:03  Monitor:  asyncd sent allowConnections: 1
> 10/26/05 14:34:03  Listener:  Reset
> 10/26/05 14:34:03  Monitor:  Internet Sharing preparations: 5
> 10/26/05 14:34:03  Monitor:  Connection status from 125 to 200
> 10/26/05 14:34:03  Monitor:  usb: Thread creation succeeded
> 10/26/05 14:34:03  Monitor:  usb: Thread creation succeeded
> 10/26/05 14:34:47  MSUI:  Entourage: initialize
> 
> 
> _______________________________________________
> missing-sync-winmobile-talk mailing list
> missing-sync-winmobile-talk at lists.markspace.com
> Unsubcribing information, subscription options and list archives can be found
> at:
> http://lists.markspace.com/mailman/listinfo/missing-sync-winmobile-talk