[missing-sync-winmobile-talk] No sync on 10.4.3

[Ken Freeman]

The Missing Sync for Windows Mobile should work fine with 10.4.3. We tested
Missing Sync with early versions of 10.4.3 and the final version. I did see
a few other postings to this list from people who had problems right after
upgrading. Sounds like you have already checked your firewall settings. If
you have the firewall enabled try opening ports 5678 and 5679. Also try:

1) Soft Reset your device

2) Make sure ActiveSync is set to sync via USB
Launch ActiveSync on the device, then go to Options > Options (again) >
enable "When cradled Enable PC Sync using this connection" and make sure USB
is selected in the pop-up.

3) Connect directly to the Mac
Do NOT use a USB hub or usb port on a keyboard

4) Internet Connection
Some users have reported that they can only connect while they have an
Internet connection. This should not be the case, but try to connect the
device while you are connected to the Internet.

5) Trash Preferences
Trash the " MissingSync for Windows Mobile Prefs" preferences file found at
~/Library/Preferences/MissingSync for Windows Mobile Prefs.

If you still can't connect send your log file and console log (.zip the two
together) to support using the form at
http://www.markspace.com/support/request_windowsmobile.html.

Ken


On 11/10/05 4:47 AM, "Gregg Martinson" <gregg.martinson at gmail.com> wrote:

> Thanks, but that isn't the problem either.  Is there a way to ask for
> a refund from Mark/Space and move on to macsync?
> On 11/10/05, Niek Prakken <nhjprakken at gmail.com> wrote:
>> have you already tried to disable your firewall in sytem preferences
>> --> Sharing --> Firewall ?
>> 
>> This worked for me (USB ) (still no solution for BT connection however).
>> 
>> 
>> 
>> On 11/9/05, dennis.neill <dennis.neill at btinternet.com> wrote:
>>> I have a G5 as well and it worked fine until I installed wm5 on my
>>> x50v.  There is an update coming hopefully soon.
>>> 
>>> Den
>>> On 9 Nov 2005, at 22:42, Gregg Martinson wrote:
>>> 
>>>> I upupgraded to 10.4.3 and I haven't been able to even get the machine
>>>> to connect to the mac.  I am using a Macintosh g5 and have uninstalled
>>>> and reinstalled missing sync probably ten times.  I have the sync
>>>> cables plugged into the device(an axim X50V).  I know tht it works,
>>>> because it charges.  But turning it on on the stand doesn't register
>>>> anything on the screen.  The translucent USB connection screen doesn't
>>>> appear at all.  I spent 40 bucks on this progam and it doesn't seem to
>>>> be working at all after the first or second sync.  Is there any
>>>> suggestions about what to do.  Thanks, Gregg
>>>> 
>>>> _______________________________________________
>>>> missing-sync-winmobile-talk mailing list
>>>> missing-sync-winmobile-talk at lists.markspace.com
>>>> Unsubcribing information, subscription options and list archives
>>>> can be found at:
>>>> http://lists.markspace.com/mailman/listinfo/missing-sync-winmobile-
>>>> talk
>>> 
>>> _______________________________________________
>>> missing-sync-winmobile-talk mailing list
>>> missing-sync-winmobile-talk at lists.markspace.com
>>> Unsubcribing information, subscription options and list archives can be
>>> found at:
>>> http://lists.markspace.com/mailman/listinfo/missing-sync-winmobile-talk
>>> 
>> 
>> 
>> --
>> N.H.J.Prakken
>> 
>> +31 6 303 8228 4
>> 
>> _______________________________________________
>> missing-sync-winmobile-talk mailing list
>> missing-sync-winmobile-talk at lists.markspace.com
>> Unsubcribing information, subscription options and list archives can be found
>> at:
>> http://lists.markspace.com/mailman/listinfo/missing-sync-winmobile-talk
>> 
> 
> _______________________________________________
> missing-sync-winmobile-talk mailing list
> missing-sync-winmobile-talk at lists.markspace.com
> Unsubcribing information, subscription options and list archives can be found
> at:
> http://lists.markspace.com/mailman/listinfo/missing-sync-winmobile-talk