From mjhackney at cox.net Sun Nov 5 21:45:28 2006 From: mjhackney at cox.net (Mary Hackney) Date: Sun Nov 5 19:45:33 2006 Subject: [missing-sync-palmos-talk] upgrading from Treo 650 to 700p Message-ID: First, let me apologize in advance if this has already been addressed, but I couldn't find it if it has. Can I get by without installing Palm desktop at all when my 700p arrives? Has anyone successfully ported the info on the old phone to the new phone just by hot syncing and not changing the username? I'm not looking forward to losing my contacts/calendar or my third party apps. If someone knows a site that explains how to upgrade with minimum problems, please send me the url. I'm hoping to get this right the first time. Thanks so much for any help/suggestions. -- Mary Hackney From k.dawson at mac.com Sun Nov 5 22:25:19 2006 From: k.dawson at mac.com (Kerry D) Date: Sun Nov 5 20:25:33 2006 Subject: [missing-sync-palmos-talk] upgrading from Treo 650 to 700p In-Reply-To: References: Message-ID: <841-SnapperMsgF9EDB6B5C17469B9@[10.0.1.4]> I've upgraded many times. I've only recently installed Missing Sync so I'm not a hundred percent sure what happens when its installed. However, the standard practice, when buying a new Palm device, is to run the Palm installation software that came with it. Not only does it install the Palm Desktop and Hotsync (which we all would have from our previous device) but it usually installs software that gets loaded to the device. In addition, for certain devices, there are sometimes, on Palm's website, additional patches to improve the device (probably not in the case of the 700p but if you were to buy a Lifedrive you'd need to download update 2 from Palm's website. What I always do and it has been recommended to me more than once by Palm tech's is do a clean install. Its a bit of work but ensures there are no conflicts. However, if you go over to Brighthand.com to the Palm forum, you'll find many users there just do a straight upgrade without problem. Now, in terms of Missing Sync being in place, I can't see how it would be possible to run the Palm installation software when you get your device. I would think this would have to be uninstalld, your Palm software installed and then Missing Sync reinstalled. Since I do clean installs this effectively what I'm doing only at a far more in depth but time consuming level. ___ Kerry ...... Original Message ....... On Sun, 05 Nov 2006 21:45:28 -0600 "Mary Hackney" wrote: >First, let me apologize in advance if this has already been >addressed, but I couldn't find it if it has. Can I get by without >installing Palm desktop at all when my 700p arrives? Has anyone >successfully ported the info on the old phone to the new phone just >by hot syncing and not changing the username? I'm not looking >forward to losing my contacts/calendar or my third party apps. If >someone knows a site that explains how to upgrade with minimum >problems, please send me the url. I'm hoping to get this right the >first time. Thanks so much for any help/suggestions. >-- >Mary Hackney > >_______________________________________________ >missing-sync-palmos-talk mailing list >missing-sync-palmos-talk@lists.markspace.com >To unsubscribe, send an email (no subject required) from your subscribed email address to: >missing-sync-palmos-talk-leave@lists.markspace.com From patricia.warwick at gmail.com Mon Nov 6 06:46:40 2006 From: patricia.warwick at gmail.com (Patricia Warwick) Date: Mon Nov 6 04:46:48 2006 Subject: [missing-sync-palmos-talk] upgrading from Treo 650 to 700p In-Reply-To: <841-SnapperMsgF9EDB6B5C17469B9@10.0.1.4> References: <841-SnapperMsgF9EDB6B5C17469B9@10.0.1.4> Message-ID: <289aecc60611060446s6d9e7d8co44e41077f87992d4@mail.gmail.com> Since Missing Sync replaces the functionality of the Palm Desktop software it should not benecessary to install any of the Palm software unless you want to use the Palm Desktop. Also it should be easy to port the data to the new PDA and you should be able to use the same user name. All I would do is intall the Missing Sync software and then sync with your old PDA. After that make a copy of any data you want to move to the new PDA (just to be safe) and sync with your new PDA and follow the instructions. This is no different than doing a hard reset on your Palm. You'll probably have to specify a user name but if so just use your existing one. BTW, you might consider using the Missing Sync forums for questions in future. This list is not being used anymore (AFAIK) On 11/5/06, Kerry D wrote: > > I've upgraded many times. I've only recently installed Missing Sync so I'm > not a hundred percent sure what happens when its installed. However, the > standard practice, when buying a new Palm device, is to run the Palm > installation software that came with it. Not only does it install the Palm > Desktop and Hotsync (which we all would have from our previous device) but > it usually installs software that gets loaded to the device. In addition, > for certain devices, there are sometimes, on Palm's website, additional > patches to improve the device (probably not in the case of the 700p but if > you were to buy a Lifedrive you'd need to download update 2 from Palm's > website. > > What I always do and it has been recommended to me more than once by Palm > tech's is do a clean install. Its a bit of work but ensures there are no > conflicts. However, if you go over to Brighthand.com to the Palm forum, > you'll find many users there just do a straight upgrade without problem. > > Now, in terms of Missing Sync being in place, I can't see how it would be > possible to run the Palm installation software when you get your device. I > would think this would have to be uninstalld, your Palm software installed > and then Missing Sync reinstalled. Since I do clean installs this > effectively what I'm doing only at a far more in depth but time consuming > level. > > > ___ > Kerry > > ...... Original Message ....... > On Sun, 05 Nov 2006 21:45:28 -0600 "Mary Hackney" > wrote: > >First, let me apologize in advance if this has already been > >addressed, but I couldn't find it if it has. Can I get by without > >installing Palm desktop at all when my 700p arrives? Has anyone > >successfully ported the info on the old phone to the new phone just > >by hot syncing and not changing the username? I'm not looking > >forward to losing my contacts/calendar or my third party apps. If > >someone knows a site that explains how to upgrade with minimum > >problems, please send me the url. I'm hoping to get this right the > >first time. Thanks so much for any help/suggestions. > >-- > >Mary Hackney > > > >_______________________________________________ > >missing-sync-palmos-talk mailing list > >missing-sync-palmos-talk@lists.markspace.com > >To unsubscribe, send an email (no subject required) from your subscribed > email address to: > >missing-sync-palmos-talk-leave@lists.markspace.com > > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > To unsubscribe, send an email (no subject required) from your subscribed > email address to: > missing-sync-palmos-talk-leave@lists.markspace.com > From k.dawson at mac.com Mon Nov 6 10:17:45 2006 From: k.dawson at mac.com (Kerry D) Date: Mon Nov 6 08:45:30 2006 Subject: [missing-sync-palmos-talk] upgrading from Treo 650 to 700p In-Reply-To: <289aecc60611060446s6d9e7d8co44e41077f87992d4@mail.gmail.com> References: <841-SnapperMsgF9EDB6B5C17469B9@10.0.1.4> <289aecc60611060446s6d9e7d8co44e41077f87992d4@mail.gmail.com> Message-ID: <847-SnapperMsgF9EDB6B5C1751727@[10.0.1.4]> Scott - I think you need to weigh in on thisl. I've always been told by Palm that you need to run the install disk that comes with a new device as they load software to the device. I can't see how you can do this with Missing Sync in place. I think if you do just a straight sync with Missing Sync, yes, you will restore your new device to that of the old, but you won't get potentially any of the software (prc files) that are intended for the new device from the Palm install disk. This is why I would think you'd need to uninstall Missing Sync, run the Palm install disk, sync (maybe at this point), install Missing Sync (or sync at this point?) and away you go. However, I think that it would be useful for clarification around this. I've seen many whio upgrade and wonder about this. I don't recall what or if your manual addresses this. For myself, I always do a clean install as actually a couple of Palm tech supports over time have suggested this is the best approach to avoid conflicts. But, many users over at Brighthand.com just do upgrades without incident. What are your views. ___ Kerry ...... Original Message ....... On Mon, 06 Nov 2006 07:46:40 -0500 "Patricia Warwick" wrote: >Since Missing Sync replaces the functionality of the Palm Desktop software >it should not benecessary to install any of the Palm software unless you >want to use the Palm Desktop. Also it should be easy to port the data to the >new PDA and you should be able to use the same user name. All I would do is >intall the Missing Sync software and then sync with your old PDA. After that >make a copy of any data you want to move to the new PDA (just to be safe) >and sync with your new PDA and follow the instructions. This is no different >than doing a hard reset on your Palm. You'll probably have to specify a user >name but if so just use your existing one. > >BTW, you might consider using the Missing Sync forums for questions in >future. This list is not being used anymore (AFAIK) > >On 11/5/06, Kerry D wrote: >> >> I've upgraded many times. I've only recently installed Missing Sync so I'm >> not a hundred percent sure what happens when its installed. However, the >> standard practice, when buying a new Palm device, is to run the Palm >> installation software that came with it. Not only does it install the Palm >> Desktop and Hotsync (which we all would have from our previous device) but >> it usually installs software that gets loaded to the device. In addition, >> for certain devices, there are sometimes, on Palm's website, additional >> patches to improve the device (probably not in the case of the 700p but if >> you were to buy a Lifedrive you'd need to download update 2 from Palm's >> website. >> >> What I always do and it has been recommended to me more than once by Palm >> tech's is do a clean install. Its a bit of work but ensures there are no >> conflicts. However, if you go over to Brighthand.com to the Palm forum, >> you'll find many users there just do a straight upgrade without problem. >> >> Now, in terms of Missing Sync being in place, I can't see how it would be >> possible to run the Palm installation software when you get your device. I >> would think this would have to be uninstalld, your Palm software installed >> and then Missing Sync reinstalled. Since I do clean installs this >> effectively what I'm doing only at a far more in depth but time consuming >> level. >> >> >> ___ >> Kerry >> >> ...... Original Message ....... >> On Sun, 05 Nov 2006 21:45:28 -0600 "Mary Hackney" >> wrote: >> >First, let me apologize in advance if this has already been >> >addressed, but I couldn't find it if it has. Can I get by without >> >installing Palm desktop at all when my 700p arrives? Has anyone >> >successfully ported the info on the old phone to the new phone just >> >by hot syncing and not changing the username? I'm not looking >> >forward to losing my contacts/calendar or my third party apps. If >> >someone knows a site that explains how to upgrade with minimum >> >problems, please send me the url. I'm hoping to get this right the >> >first time. Thanks so much for any help/suggestions. >> >-- >> >Mary Hackney >> > >> >_______________________________________________ >> >missing-sync-palmos-talk mailing list >> >missing-sync-palmos-talk@lists.markspace.com >> >To unsubscribe, send an email (no subject required) from your subscribed >> email address to: >> >missing-sync-palmos-talk-leave@lists.markspace.com >> >> _______________________________________________ >> missing-sync-palmos-talk mailing list >> missing-sync-palmos-talk@lists.markspace.com >> To unsubscribe, send an email (no subject required) from your subscribed >> email address to: >> missing-sync-palmos-talk-leave@lists.markspace.com >> >_______________________________________________ >missing-sync-palmos-talk mailing list >missing-sync-palmos-talk@lists.markspace.com >To unsubscribe, send an email (no subject required) from your subscribed email address to: >missing-sync-palmos-talk-leave@lists.markspace.com From sgruby at markspace.com Mon Nov 6 11:06:20 2006 From: sgruby at markspace.com (Scott Gruby) Date: Mon Nov 6 09:06:24 2006 Subject: [missing-sync-palmos-talk] upgrading from Treo 650 to 700p In-Reply-To: <847-SnapperMsgF9EDB6B5C1751727@[10.0.1.4]> References: <841-SnapperMsgF9EDB6B5C17469B9@10.0.1.4> <289aecc60611060446s6d9e7d8co44e41077f87992d4@mail.gmail.com> <847-SnapperMsgF9EDB6B5C1751727@[10.0.1.4]> Message-ID: <69C9BDB4-2C62-4BC3-91A9-FE731586D572@markspace.com> On Nov 6, 2006, at 8:17 AM, Kerry D wrote: > Scott - I think you need to weigh in on thisl. I've always been > told by > Palm that you need to run the install disk that comes with a new > device as > they load software to the device. I can't see how you can do this with > Missing Sync in place. I think if you do just a straight sync with > Missing > Sync, yes, you will restore your new device to that of the old, but > you > won't get potentially any of the software (prc files) that are > intended for > the new device from the Palm install disk. This is why I would > think you'd > need to uninstall Missing Sync, run the Palm install disk, sync > (maybe at > this point), install Missing Sync (or sync at this point?) and away > you go. > > However, I think that it would be useful for clarification around > this. > I've seen many whio upgrade and wonder about this. I don't recall > what or > if your manual addresses this. For myself, I always do a clean > install as > actually a couple of Palm tech supports over time have suggested > this is > the best approach to avoid conflicts. But, many users over at > Brighthand.com just do upgrades without incident. > My personal procedure would be to completely ignore the installer that comes with the new handheld and simply use Missing Sync. If you look on the CD, there is typically a folder called Essential_Software (or something like that) that has installers or simply prcs for additional software for the device; run those if you want. If you're on Tiger, you can click on the installer package, choose Show Package Contents, copy the Archive.pax.gz to your desktop and then double click it. The contents of the installer will be placed in an Archive folder on your desktop. You can then navigate through it and see that there is very little, if anything, the installer adds for you. I just put in a TX CD and the only handheld file I saw in the installer was MMUpgrade.prc which would appear to me upgrading MultiMail to VersaMail which isn't needed for most people. So, I think it is a bit of a waste of time to uninstall Missing Sync, install Palm Desktop, and then re-install Missing Sync as nothing extra will be installed for your handheld. (I'd recommend moving this discussion to the forums as this mailing list will be turned off in the near future.) -- Scott Gruby Mark/Space, Inc. Please visit for assistance with Mark/Space products. From nina at alt-adv.com Tue Nov 7 09:37:39 2006 From: nina at alt-adv.com (nina altschiller) Date: Tue Nov 7 07:44:18 2006 Subject: [missing-sync-palmos-talk] upgrading from Treo 650 to 700p In-Reply-To: <847-SnapperMsgF9EDB6B5C1751727@[10.0.1.4]> References: <841-SnapperMsgF9EDB6B5C17469B9@10.0.1.4> <289aecc60611060446s6d9e7d8co44e41077f87992d4@mail.gmail.com> <847-SnapperMsgF9EDB6B5C1751727@[10.0.1.4]> Message-ID: I've got a question for everyone: I have a new Treo 650 that I want to sync to Entourage. Missing Sync says I need Palm v5 software. Palm doesn't make v5.2.1 for Macs, only v4.2.1. Entourage is a Windows program for Macs...... If I don't use Entourage, can I sync to ICal and Mac Mail? On Nov 6, 2006, at 11:17 AM, Kerry D wrote: > Scott - I think you need to weigh in on thisl. I've always been > told by > Palm that you need to run the install disk that comes with a new > device as > they load software to the device. I can't see how you can do this with > Missing Sync in place. I think if you do just a straight sync with > Missing > Sync, yes, you will restore your new device to that of the old, but > you > won't get potentially any of the software (prc files) that are > intended for > the new device from the Palm install disk. This is why I would > think you'd > need to uninstall Missing Sync, run the Palm install disk, sync > (maybe at > this point), install Missing Sync (or sync at this point?) and away > you go. > > However, I think that it would be useful for clarification around > this. > I've seen many whio upgrade and wonder about this. I don't recall > what or > if your manual addresses this. For myself, I always do a clean > install as > actually a couple of Palm tech supports over time have suggested > this is > the best approach to avoid conflicts. But, many users over at > Brighthand.com just do upgrades without incident. > > What are your views. > ___ > Kerry > > ...... Original Message ....... > On Mon, 06 Nov 2006 07:46:40 -0500 "Patricia Warwick" > wrote: >> Since Missing Sync replaces the functionality of the Palm Desktop >> software >> it should not benecessary to install any of the Palm software >> unless you >> want to use the Palm Desktop. Also it should be easy to port the >> data to > the >> new PDA and you should be able to use the same user name. All I >> would do is >> intall the Missing Sync software and then sync with your old PDA. >> After > that >> make a copy of any data you want to move to the new PDA (just to >> be safe) >> and sync with your new PDA and follow the instructions. This is no > different >> than doing a hard reset on your Palm. You'll probably have to >> specify a > user >> name but if so just use your existing one. >> >> BTW, you might consider using the Missing Sync forums for >> questions in >> future. This list is not being used anymore (AFAIK) >> >> On 11/5/06, Kerry D wrote: >>> >>> I've upgraded many times. I've only recently installed Missing >>> Sync so > I'm >>> not a hundred percent sure what happens when its installed. >>> However, the >>> standard practice, when buying a new Palm device, is to run the Palm >>> installation software that came with it. Not only does it install >>> the > Palm >>> Desktop and Hotsync (which we all would have from our previous >>> device) > but >>> it usually installs software that gets loaded to the device. In >>> addition, >>> for certain devices, there are sometimes, on Palm's website, >>> additional >>> patches to improve the device (probably not in the case of the >>> 700p but > if >>> you were to buy a Lifedrive you'd need to download update 2 from >>> Palm's >>> website. >>> >>> What I always do and it has been recommended to me more than once >>> by Palm >>> tech's is do a clean install. Its a bit of work but ensures there >>> are no >>> conflicts. However, if you go over to Brighthand.com to the Palm >>> forum, >>> you'll find many users there just do a straight upgrade without >>> problem. >>> >>> Now, in terms of Missing Sync being in place, I can't see how it >>> would be >>> possible to run the Palm installation software when you get your >>> device. > I >>> would think this would have to be uninstalld, your Palm software > installed >>> and then Missing Sync reinstalled. Since I do clean installs this >>> effectively what I'm doing only at a far more in depth but time >>> consuming >>> level. >>> >>> >>> ___ >>> Kerry >>> >>> ...... Original Message ....... >>> On Sun, 05 Nov 2006 21:45:28 -0600 "Mary Hackney" >>> >>> wrote: >>>> First, let me apologize in advance if this has already been >>>> addressed, but I couldn't find it if it has. Can I get by without >>>> installing Palm desktop at all when my 700p arrives? Has anyone >>>> successfully ported the info on the old phone to the new phone just >>>> by hot syncing and not changing the username? I'm not looking >>>> forward to losing my contacts/calendar or my third party apps. If >>>> someone knows a site that explains how to upgrade with minimum >>>> problems, please send me the url. I'm hoping to get this right the >>>> first time. Thanks so much for any help/suggestions. >>>> -- >>>> Mary Hackney >>>> >>>> _______________________________________________ >>>> missing-sync-palmos-talk mailing list >>>> missing-sync-palmos-talk@lists.markspace.com >>>> To unsubscribe, send an email (no subject required) from your >>>> subscribed >>> email address to: >>>> missing-sync-palmos-talk-leave@lists.markspace.com >>> >>> _______________________________________________ >>> missing-sync-palmos-talk mailing list >>> missing-sync-palmos-talk@lists.markspace.com >>> To unsubscribe, send an email (no subject required) from your >>> subscribed >>> email address to: >>> missing-sync-palmos-talk-leave@lists.markspace.com >>> >> _______________________________________________ >> missing-sync-palmos-talk mailing list >> missing-sync-palmos-talk@lists.markspace.com >> To unsubscribe, send an email (no subject required) from your >> subscribed email address to: >> missing-sync-palmos-talk-leave@lists.markspace.com > > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > To unsubscribe, send an email (no subject required) from your > subscribed email address to: > missing-sync-palmos-talk-leave@lists.markspace.com > From ted at salasobrien.com Tue Nov 7 10:27:32 2006 From: ted at salasobrien.com (Ted Mendoza) Date: Tue Nov 7 08:27:38 2006 Subject: [missing-sync-palmos-talk] upgrading from Treo 650 to 700p In-Reply-To: References: <841-SnapperMsgF9EDB6B5C17469B9@10.0.1.4> <289aecc60611060446s6d9e7d8co44e41077f87992d4@mail.gmail.com> <847-SnapperMsgF9EDB6B5C1751727@[10.0.1.4]> Message-ID: <15E80194-1D8B-4F25-93FC-1F95D0CDE74F@salasobrien.com> yes - very easily, i might add... On Nov 7, 2006, at 7:37 AM, nina altschiller wrote: > I've got a question for everyone: I have a new Treo 650 that I > want to sync to Entourage. Missing Sync says I need Palm v5 > software. Palm doesn't make v5.2.1 for Macs, only v4.2.1. > Entourage is a Windows program for Macs...... If I don't use > Entourage, can I sync to ICal and Mac Mail? > > > On Nov 6, 2006, at 11:17 AM, Kerry D wrote: > >> Scott - I think you need to weigh in on thisl. I've always been >> told by >> Palm that you need to run the install disk that comes with a new >> device as >> they load software to the device. I can't see how you can do this >> with >> Missing Sync in place. I think if you do just a straight sync with >> Missing >> Sync, yes, you will restore your new device to that of the old, >> but you >> won't get potentially any of the software (prc files) that are >> intended for >> the new device from the Palm install disk. This is why I would >> think you'd >> need to uninstall Missing Sync, run the Palm install disk, sync >> (maybe at >> this point), install Missing Sync (or sync at this point?) and >> away you go. >> >> However, I think that it would be useful for clarification around >> this. >> I've seen many whio upgrade and wonder about this. I don't recall >> what or >> if your manual addresses this. For myself, I always do a clean >> install as >> actually a couple of Palm tech supports over time have suggested >> this is >> the best approach to avoid conflicts. But, many users over at >> Brighthand.com just do upgrades without incident. >> >> What are your views. >> ___ >> Kerry >> >> ...... Original Message ....... >> On Mon, 06 Nov 2006 07:46:40 -0500 "Patricia Warwick" >> wrote: >>> Since Missing Sync replaces the functionality of the Palm Desktop >>> software >>> it should not benecessary to install any of the Palm software >>> unless you >>> want to use the Palm Desktop. Also it should be easy to port the >>> data to >> the >>> new PDA and you should be able to use the same user name. All I >>> would do is >>> intall the Missing Sync software and then sync with your old PDA. >>> After >> that >>> make a copy of any data you want to move to the new PDA (just to >>> be safe) >>> and sync with your new PDA and follow the instructions. This is no >> different >>> than doing a hard reset on your Palm. You'll probably have to >>> specify a >> user >>> name but if so just use your existing one. >>> >>> BTW, you might consider using the Missing Sync forums for >>> questions in >>> future. This list is not being used anymore (AFAIK) >>> >>> On 11/5/06, Kerry D wrote: >>>> >>>> I've upgraded many times. I've only recently installed Missing >>>> Sync so >> I'm >>>> not a hundred percent sure what happens when its installed. >>>> However, the >>>> standard practice, when buying a new Palm device, is to run the >>>> Palm >>>> installation software that came with it. Not only does it >>>> install the >> Palm >>>> Desktop and Hotsync (which we all would have from our previous >>>> device) >> but >>>> it usually installs software that gets loaded to the device. In >>>> addition, >>>> for certain devices, there are sometimes, on Palm's website, >>>> additional >>>> patches to improve the device (probably not in the case of the >>>> 700p but >> if >>>> you were to buy a Lifedrive you'd need to download update 2 from >>>> Palm's >>>> website. >>>> >>>> What I always do and it has been recommended to me more than >>>> once by Palm >>>> tech's is do a clean install. Its a bit of work but ensures >>>> there are no >>>> conflicts. However, if you go over to Brighthand.com to the Palm >>>> forum, >>>> you'll find many users there just do a straight upgrade without >>>> problem. >>>> >>>> Now, in terms of Missing Sync being in place, I can't see how it >>>> would be >>>> possible to run the Palm installation software when you get your >>>> device. >> I >>>> would think this would have to be uninstalld, your Palm software >> installed >>>> and then Missing Sync reinstalled. Since I do clean installs this >>>> effectively what I'm doing only at a far more in depth but time >>>> consuming >>>> level. >>>> >>>> >>>> ___ >>>> Kerry >>>> >>>> ...... Original Message ....... >>>> On Sun, 05 Nov 2006 21:45:28 -0600 "Mary Hackney" >>>> >>>> wrote: >>>>> First, let me apologize in advance if this has already been >>>>> addressed, but I couldn't find it if it has. Can I get by without >>>>> installing Palm desktop at all when my 700p arrives? Has anyone >>>>> successfully ported the info on the old phone to the new phone >>>>> just >>>>> by hot syncing and not changing the username? I'm not looking >>>>> forward to losing my contacts/calendar or my third party apps. If >>>>> someone knows a site that explains how to upgrade with minimum >>>>> problems, please send me the url. I'm hoping to get this right >>>>> the >>>>> first time. Thanks so much for any help/suggestions. >>>>> -- >>>>> Mary Hackney >>>>> >>>>> _______________________________________________ >>>>> missing-sync-palmos-talk mailing list >>>>> missing-sync-palmos-talk@lists.markspace.com >>>>> To unsubscribe, send an email (no subject required) from your >>>>> subscribed >>>> email address to: >>>>> missing-sync-palmos-talk-leave@lists.markspace.com >>>> >>>> _______________________________________________ >>>> missing-sync-palmos-talk mailing list >>>> missing-sync-palmos-talk@lists.markspace.com >>>> To unsubscribe, send an email (no subject required) from your >>>> subscribed >>>> email address to: >>>> missing-sync-palmos-talk-leave@lists.markspace.com >>>> >>> _______________________________________________ >>> missing-sync-palmos-talk mailing list >>> missing-sync-palmos-talk@lists.markspace.com >>> To unsubscribe, send an email (no subject required) from your >>> subscribed email address to: >>> missing-sync-palmos-talk-leave@lists.markspace.com >> >> _______________________________________________ >> missing-sync-palmos-talk mailing list >> missing-sync-palmos-talk@lists.markspace.com >> To unsubscribe, send an email (no subject required) from your >> subscribed email address to: >> missing-sync-palmos-talk-leave@lists.markspace.com >> > > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > To unsubscribe, send an email (no subject required) from your > subscribed email address to: > missing-sync-palmos-talk-leave@lists.markspace.com > From berkowit at silcom.com Tue Nov 7 11:52:12 2006 From: berkowit at silcom.com (Paul Berkowitz) Date: Tue Nov 7 09:52:16 2006 Subject: [missing-sync-palmos-talk] upgrading from Treo 650 to 700p In-Reply-To: Message-ID: On 11/7/06 7:37 AM, "nina altschiller" wrote: > I've got a question for everyone: I have a new Treo 650 that I want > to sync to Entourage. Missing Sync says I need Palm v5 software. > Palm doesn't make v5.2.1 for Macs, only v4.2.1. Entourage is a > Windows program for Macs...... If I don't use Entourage, can I sync > to ICal and Mac Mail? 1. Palm DOES make its v5 OS, which works perfectly fine, and that's what your Treo has. It has nothing to do with whether you sync to Mac or Windows. You're confusing that with PALM DESKTOP for Mac, which you don't need since you have Missing Sync. 2. Entourage has nothing to do with Windows. It's made by Microsoft, for Macs only. 3. You have a choice with how to sync your Treo to Entourage: a) Use the Entourage Conduit, provided by Microsoft Office (run Handheld Sync Installer in the Additional Tools folder in the Microsoft Office 2004 folder to install it). It works very well. In Missing Sync. double-click Entourage Conduit and check "Enable synchronization with these new handhelds". You probably neglected to do that. (This method works also with older versions of Missing Sync, namely 4.0.6). OR b) In the latest versions of Entourage (11.2.3 and higher - you can update easily via Help/Check for Updates in Entourage), you can choose to enable Sync Services preferences in Entourage Preferences. In this case, you would use Missing Sync 5's own conduit to replace the Entourage Conduit. It will work via Sync Services the same way that it does with iCal and Address Book. Some people prefer one, some the other. Using the first method, you don't get second addresses, calendar event categories and some other fields synching. But it works perfectly and smoothly, with no problems, ever. Using the second method, you get the second addresses, but you still don't get calendar events categories since they will all appear as "entourage" category. You also are subject to occasional freakiness of Sync Services, including possibly loss of data. The same applies when synching to iCal and Address Book. Me - I prefer the first method. -- Paul Berkowitz From k.dawson at mac.com Tue Nov 7 12:54:44 2006 From: k.dawson at mac.com (Kerry D) Date: Tue Nov 7 10:54:50 2006 Subject: [missing-sync-palmos-talk] upgrading from Treo 650 to 700p In-Reply-To: Message-ID: Paul - great description and I think you've answered my question as to which product to use. As I mentioned in an E-mail to you, in 3.5 years of using Entourage I never had a database corruption like I just experienced with iCal and its task. Its really time consuming to fix this kind of thing. On 11/7/06 12:52 PM, "Paul Berkowitz" wrote: > On 11/7/06 7:37 AM, "nina altschiller" wrote: > >> I've got a question for everyone: I have a new Treo 650 that I want >> to sync to Entourage. Missing Sync says I need Palm v5 software. >> Palm doesn't make v5.2.1 for Macs, only v4.2.1. Entourage is a >> Windows program for Macs...... If I don't use Entourage, can I sync >> to ICal and Mac Mail? > > 1. Palm DOES make its v5 OS, which works perfectly fine, and that's what > your Treo has. It has nothing to do with whether you sync to Mac or Windows. > You're confusing that with PALM DESKTOP for Mac, which you don't need since > you have Missing Sync. > > 2. Entourage has nothing to do with Windows. It's made by Microsoft, for > Macs only. > > 3. You have a choice with how to sync your Treo to Entourage: > > a) Use the Entourage Conduit, provided by Microsoft Office (run Handheld > Sync Installer in the Additional Tools folder in the Microsoft Office 2004 > folder to install it). It works very well. In Missing Sync. double-click > Entourage Conduit and check "Enable synchronization with these new > handhelds". You probably neglected to do that. (This method works also with > older versions of Missing Sync, namely 4.0.6). > > OR > > b) In the latest versions of Entourage (11.2.3 and higher - you can > update easily via Help/Check for Updates in Entourage), you can choose to > enable Sync Services preferences in Entourage Preferences. In this case, you > would use Missing Sync 5's own conduit to replace the Entourage Conduit. It > will work via Sync Services the same way that it does with iCal and Address > Book. > > Some people prefer one, some the other. Using the first method, you don't > get second addresses, calendar event categories and some other fields > synching. But it works perfectly and smoothly, with no problems, ever. > > Using the second method, you get the second addresses, but you still don't > get calendar events categories since they will all appear as "entourage" > category. You also are subject to occasional freakiness of Sync Services, > including possibly loss of data. The same applies when synching to iCal and > Address Book. Me - I prefer the first method. Kerry -- From grbrower at mac.com Tue Nov 7 15:09:46 2006 From: grbrower at mac.com (Gary Brower) Date: Tue Nov 7 13:09:52 2006 Subject: [missing-sync-palmos-talk] New User Syncing Message-ID: <6028C58A-19AF-421D-9718-3239F1EA1EC5@mac.com> Hi, For a variety of reasons, I had to create a new user on my Mac and transfer all of my files over there. I obviously missed some, as I cannot sync properly with my PDA any more. Here is the last Sync History I received: Sync starting at 11/7/06 6:28 AM (06:28:20) on Bluetooth (5.1.2) SplashPhoto.prc installed TimeCopy.prc installed OK Install TimeCopy: host 2006/11/07 06:29:23, palm 2006/11/07 06:29:23, diff: 0s OK TimeCopy There was an error starting a synchronization session. This conduit has been unregistered, and the next time you synchronize you will be prompted to synchronize. If that does not happen, try restarting and synchronize again. SyncClient error. Can't initialize sync session. OK Mark/Space Contacts with 2 message(s) OK Mark/Space MemoPad There was an error starting a synchronization session. This conduit has been unregistered, and the next time you synchronize you will be prompted to synchronize. If that does not happen, try restarting and synchronize again. SyncClient error. Can't initialize sync session. OK Mark/Space Tasks with 2 message(s) There was an error starting a synchronization session. This conduit has been unregistered, and the next time you synchronize you will be prompted to synchronize. If that does not happen, try restarting and synchronize again. SyncClient error. Can't initialize sync session. OK Mark/Space Events with 2 message(s) OK Install Backed up CyclistsLogDB Backed up ContactsDB-PAdd Backed up CalendarDB-PDat Backed up MemosDB-PMem Backed up TasksDB-PTod Backed up AddressDB Backed up DatebookDB Backed up ToDoDB Backed up SplashPhoto Backed up TimeCopy Backed up psysLaunchDB Backed up Saved Preferences OK Backup Sync completed successfully at 11/7/06 6:41 AM (06:41:22) How do I fix this? Thanks, Gary From sgruby at markspace.com Tue Nov 7 15:25:34 2006 From: sgruby at markspace.com (Scott Gruby) Date: Tue Nov 7 13:25:38 2006 Subject: [missing-sync-palmos-talk] New User Syncing In-Reply-To: <6028C58A-19AF-421D-9718-3239F1EA1EC5@mac.com> References: <6028C58A-19AF-421D-9718-3239F1EA1EC5@mac.com> Message-ID: On Nov 7, 2006, at 1:09 PM, Gary Brower wrote: > Hi, > > For a variety of reasons, I had to create a new user on my Mac and > transfer all of my files over there. I obviously missed some, as I > cannot sync properly with my PDA any more. Here is the last Sync > History I received: > > Sync starting at 11/7/06 6:28 AM (06:28:20) on Bluetooth (5.1.2) > SplashPhoto.prc installed > TimeCopy.prc installed > OK Install > TimeCopy: host 2006/11/07 06:29:23, palm 2006/11/07 06:29:23, diff: 0s > OK TimeCopy > There was an error starting a synchronization session. This conduit > has been unregistered, and the next time you synchronize you will > be prompted to synchronize. If that does not happen, try restarting > and synchronize again. > SyncClient error. Can't initialize sync session. > OK Mark/Space Contacts with 2 message(s) > OK Mark/Space MemoPad > There was an error starting a synchronization session. This conduit > has been unregistered, and the next time you synchronize you will > be prompted to synchronize. If that does not happen, try restarting > and synchronize again. > SyncClient error. Can't initialize sync session. > OK Mark/Space Tasks with 2 message(s) > There was an error starting a synchronization session. This conduit > has been unregistered, and the next time you synchronize you will > be prompted to synchronize. If that does not happen, try restarting > and synchronize again. > SyncClient error. Can't initialize sync session. > OK Mark/Space Events with 2 message(s) > OK Install Have you launched iCal and Address Book with the new user? If not do that. If that doesn't work, our excellent Knowledge Base has an article about this issue: -- Scott Gruby Mark/Space, Inc. Please visit for assistance with Mark/Space products. From patricia.warwick at gmail.com Tue Nov 7 15:26:40 2006 From: patricia.warwick at gmail.com (Patricia Warwick) Date: Tue Nov 7 13:26:49 2006 Subject: [missing-sync-palmos-talk] New User Syncing In-Reply-To: <6028C58A-19AF-421D-9718-3239F1EA1EC5@mac.com> References: <6028C58A-19AF-421D-9718-3239F1EA1EC5@mac.com> Message-ID: <289aecc60611071326u44fa7744j82d6d23606f89fee@mail.gmail.com> I've had problems in the past with permissions when I moved stuff to a new user id ... I'd take a look at the permissions for the Mark/Space conduits. But it may be due to a problem with your license ... I'm just guessing. On 11/7/06, Gary Brower wrote: > > Hi, > > For a variety of reasons, I had to create a new user on my Mac and > transfer all of my files over there. I obviously missed some, as I > cannot sync properly with my PDA any more. Here is the last Sync > History I received: > > Sync starting at 11/7/06 6:28 AM (06:28:20) on Bluetooth (5.1.2) > SplashPhoto.prc installed > TimeCopy.prc installed > OK Install > TimeCopy: host 2006/11/07 06:29:23, palm 2006/11/07 06:29:23, diff: 0s > OK TimeCopy > There was an error starting a synchronization session. This conduit > has been unregistered, and the next time you synchronize you will be > prompted to synchronize. If that does not happen, try restarting and > synchronize again. > SyncClient error. Can't initialize sync session. > OK Mark/Space Contacts with 2 message(s) > OK Mark/Space MemoPad > There was an error starting a synchronization session. This conduit > has been unregistered, and the next time you synchronize you will be > prompted to synchronize. If that does not happen, try restarting and > synchronize again. > SyncClient error. Can't initialize sync session. > OK Mark/Space Tasks with 2 message(s) > There was an error starting a synchronization session. This conduit > has been unregistered, and the next time you synchronize you will be > prompted to synchronize. If that does not happen, try restarting and > synchronize again. > SyncClient error. Can't initialize sync session. > OK Mark/Space Events with 2 message(s) > OK Install > Backed up CyclistsLogDB > Backed up ContactsDB-PAdd > Backed up CalendarDB-PDat > Backed up MemosDB-PMem > Backed up TasksDB-PTod > Backed up AddressDB > Backed up DatebookDB > Backed up ToDoDB > Backed up SplashPhoto > Backed up TimeCopy > Backed up psysLaunchDB > Backed up Saved Preferences > OK Backup > Sync completed successfully at 11/7/06 6:41 AM (06:41:22) > > How do I fix this? > > Thanks, > > Gary > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > To unsubscribe, send an email (no subject required) from your subscribed > email address to: > missing-sync-palmos-talk-leave@lists.markspace.com > From nina at alt-adv.com Tue Nov 7 15:39:00 2006 From: nina at alt-adv.com (nina@alt-adv.com) Date: Tue Nov 7 13:39:37 2006 Subject: [missing-sync-palmos-talk] upgrading from Treo 650 to 700p Message-ID: <200611072139.kA7LdWEg008590@omr6.networksolutionsemail.com> thanks. You have answered all my ?'s. Finally. -----Original Message----- From: Paul Berkowitz Subj: Re: [missing-sync-palmos-talk] upgrading from Treo 650 to 700p Date: Tue Nov 7, 2006 12:53 pm Size: 2K To: "The Missing Sync (Mac/Palm OS) Discussion List" On 11/7/06 7:37 AM, "nina altschiller" wrote: > I've got a question for everyone: I have a new Treo 650 that I want > to sync to Entourage. Missing Sync says I need Palm v5 software. > Palm doesn't make v5.2.1 for Macs, only v4.2.1. Entourage is a > Windows program for Macs...... If I don't use Entourage, can I sync > to ICal and Mac Mail? 1. Palm DOES make its v5 OS, which works perfectly fine, and that's what your Treo has. It has nothing to do with whether you sync to Mac or Windows. You're confusing that with PALM DESKTOP for Mac, which you don't need since you have Missing Sync. 2. Entourage has nothing to do with Windows. It's made by Microsoft, for Macs only. 3. You have a choice with how to sync your Treo to Entourage: a) Use the Entourage Conduit, provided by Microsoft Office (run Handheld Sync Installer in the Additional Tools folder in the Microsoft Office 2004 folder to install it). It works very well. In Missing Sync. double-click Entourage Conduit and check "Enable synchronization with these new handhelds". You probably neglected to do that. (This method works also with older versions of Missing Sync, namely 4.0.6). OR b) In the latest versions of Entourage (11.2.3 and higher - you can update easily via Help/Check for Updates in Entourage), you can choose to enable Sync Services preferences in Entourage Preferences. In this case, you would use Missing Sync 5's own conduit to replace the Entourage Conduit. It will work via Sync Services the same way that it does with iCal and Address Book. Some people prefer one, some the other. Using the first method, you don't get second addresses, calendar event categories and some other fields synching. But it works perfectly and smoothly, with no problems, ever. Using the second method, you get the second addresses, but you still don't get calendar events categories since they will all appear as "entourage" category. You also are subject to occasional freakiness of Sync Services, including possibly loss of data. The same applies when synching to iCal and Address Book. Me - I prefer the first method. -- Paul Berkowitz _______________________________________________ missing-sync-palmos-talk mailing list missing-sync-palmos-talk@lists.markspace.com To unsubscribe, send an email (no subject required) from your subscribed email address to: missing-sync-palmos-talk-leave@lists.markspace.com From grbrower at mac.com Wed Nov 8 14:49:20 2006 From: grbrower at mac.com (Gary Brower) Date: Wed Nov 8 12:49:29 2006 Subject: [missing-sync-palmos-talk] Re: New User Syncing Message-ID: Thanks for the suggestions. Scott suggested: > Have you launched iCal and Address Book with the new user? If not > do that. If that doesn't work, our excellent Knowledge Base has an > article about this issue: x=&mod_id=2&id=2580> The short answer is "yes". Part of the whole reason for creating a new admin user was to correct a problem I was having with .Mac syncing. So the FIRST thing I did was open iCal in the new user. As far as the Knowledge Base article goes, I've done what it suggests. But it seems to me that the article doesn't "end". If the problem I'm having is that the sync history is telling me I have a problem because the conduit is "unregistered", and then I go and "unregister" it. How do I get it "registered" again? Patricia suggested: > I've had problems in the past with permissions when I moved stuff > to a new user id ... I'd take a look at the permissions for the > Mark/Space conduits. > But it may be due to a problem with your license ... I'm just > guessing. Both of these seem logical. WHAT should I be looking at in terms of the permissions? and how do I correct the problem. I've also thought of simply uninstalling Missing Sync and reinstalling it. Would that resolve and licensing/permissions issues? By the way, there is a complicated bypass solution that I know works. I sync to .Mac from the new user. I go to the old user and "reset the device" (in other words, rewrite the old user with the (new) .Mac stuff. Then I can sync my PDA with the old user. But that's not at all optimal. Thanks. Gary From patricia.warwick at gmail.com Wed Nov 8 18:47:59 2006 From: patricia.warwick at gmail.com (Patricia Warwick) Date: Wed Nov 8 16:48:04 2006 Subject: [missing-sync-palmos-talk] Re: New User Syncing In-Reply-To: References: Message-ID: <289aecc60611081647t16c08845q2b5272d7251b619b@mail.gmail.com> When I created a new user and copied all of my existing files to the new user I ended up with a huge number of files that were readonly to my new user and I spent a lot of time checking and changing the user (the were often without an owner). I looked at the owner via the Get Info command ... I looked at folders, applications and data/preference files ... only whenever I had a problem. A lot of files had wrong ownership. How did you move your stuff from the old user to the new user? Patricia On 11/8/06, Gary Brower wrote: > > Thanks for the suggestions. > > Scott suggested: > > > Have you launched iCal and Address Book with the new user? If not > > do that. If that doesn't work, our excellent Knowledge Base has an > > article about this issue: > x=&mod_id=2&id=2580> > > The short answer is "yes". Part of the whole reason for creating a > new admin user was to correct a problem I was having with .Mac > syncing. So the FIRST thing I did was open iCal in the new user. > > As far as the Knowledge Base article goes, I've done what it > suggests. But it seems to me that the article doesn't "end". If the > problem I'm having is that the sync history is telling me I have a > problem because the conduit is "unregistered", and then I go and > "unregister" it. How do I get it "registered" again? > > Patricia suggested: > > > I've had problems in the past with permissions when I moved stuff > > to a new user id ... I'd take a look at the permissions for the > > Mark/Space conduits. > > But it may be due to a problem with your license ... I'm just > > guessing. > > Both of these seem logical. WHAT should I be looking at in terms of > the permissions? and how do I correct the problem. > > I've also thought of simply uninstalling Missing Sync and > reinstalling it. Would that resolve and licensing/permissions issues? > > By the way, there is a complicated bypass solution that I know > works. I sync to .Mac from the new user. I go to the old user and > "reset the device" (in other words, rewrite the old user with the > (new) .Mac stuff. Then I can sync my PDA with the old user. But > that's not at all optimal. > > Thanks. > > Gary > > > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > To unsubscribe, send an email (no subject required) from your subscribed > email address to: > missing-sync-palmos-talk-leave@lists.markspace.com > From nina at alt-adv.com Thu Nov 9 07:12:46 2006 From: nina at alt-adv.com (nina altschiller) Date: Thu Nov 9 05:12:54 2006 Subject: [missing-sync-palmos-talk] New User Syncing In-Reply-To: <289aecc60611071326u44fa7744j82d6d23606f89fee@mail.gmail.com> References: <6028C58A-19AF-421D-9718-3239F1EA1EC5@mac.com> <289aecc60611071326u44fa7744j82d6d23606f89fee@mail.gmail.com> Message-ID: <6F75A66A-52EF-4B7C-B353-438B14B55FDB@alt-adv.com> I hope i haven't put two carts before the horse...... Before I downloaded Missing Sync, I synced my palm one last time. I didn't complete the installation after downloading because I didn't have an expansion card with me at the time. I just put in the expansion card, and went to sync my palm one last time. Lo and behold, there's no hot sync manager on the palm desktop, she "could not be found". I copied the user data to my desktop (ah, how much easier this is with a Mac....) Now I'm reading the User Guide and trying to figure out what happened. All seems ok, nothing has been synced to Missing Sync yet, it's just that I can't find the setup assistant. The User's Guide says I should see a totally different screen when I open the Missing Sync icon (what I see is what I believe I'll see when it's all set up). When I search using finder, the only thing that comes up when I enter "Missing Sync Setup Assistant" the User guide. I don't want to do ANYTHING until I'm sure I'm doing it right. On Nov 7, 2006, at 4:26 PM, Patricia Warwick wrote: > I've had problems in the past with permissions when I moved stuff > to a new > user id ... I'd take a look at the permissions for the Mark/Space > conduits. > But it may be due to a problem with your license ... I'm just > guessing. > > On 11/7/06, Gary Brower wrote: >> >> Hi, >> >> For a variety of reasons, I had to create a new user on my Mac and >> transfer all of my files over there. I obviously missed some, as I >> cannot sync properly with my PDA any more. Here is the last Sync >> History I received: >> >> Sync starting at 11/7/06 6:28 AM (06:28:20) on Bluetooth (5.1.2) >> SplashPhoto.prc installed >> TimeCopy.prc installed >> OK Install >> TimeCopy: host 2006/11/07 06:29:23, palm 2006/11/07 06:29:23, >> diff: 0s >> OK TimeCopy >> There was an error starting a synchronization session. This conduit >> has been unregistered, and the next time you synchronize you will be >> prompted to synchronize. If that does not happen, try restarting and >> synchronize again. >> SyncClient error. Can't initialize sync session. >> OK Mark/Space Contacts with 2 message(s) >> OK Mark/Space MemoPad >> There was an error starting a synchronization session. This conduit >> has been unregistered, and the next time you synchronize you will be >> prompted to synchronize. If that does not happen, try restarting and >> synchronize again. >> SyncClient error. Can't initialize sync session. >> OK Mark/Space Tasks with 2 message(s) >> There was an error starting a synchronization session. This conduit >> has been unregistered, and the next time you synchronize you will be >> prompted to synchronize. If that does not happen, try restarting and >> synchronize again. >> SyncClient error. Can't initialize sync session. >> OK Mark/Space Events with 2 message(s) >> OK Install >> Backed up CyclistsLogDB >> Backed up ContactsDB-PAdd >> Backed up CalendarDB-PDat >> Backed up MemosDB-PMem >> Backed up TasksDB-PTod >> Backed up AddressDB >> Backed up DatebookDB >> Backed up ToDoDB >> Backed up SplashPhoto >> Backed up TimeCopy >> Backed up psysLaunchDB >> Backed up Saved Preferences >> OK Backup >> Sync completed successfully at 11/7/06 6:41 AM (06:41:22) >> >> How do I fix this? >> >> Thanks, >> >> Gary >> _______________________________________________ >> missing-sync-palmos-talk mailing list >> missing-sync-palmos-talk@lists.markspace.com >> To unsubscribe, send an email (no subject required) from your >> subscribed >> email address to: >> missing-sync-palmos-talk-leave@lists.markspace.com >> > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > To unsubscribe, send an email (no subject required) from your > subscribed email address to: > missing-sync-palmos-talk-leave@lists.markspace.com > From mark at cfc-proj2010.net Sat Nov 11 07:45:23 2006 From: mark at cfc-proj2010.net (James M Dempsey) Date: Sat Nov 11 05:45:38 2006 Subject: [missing-sync-palmos-talk] Sync Problems with Now Contact Message-ID: <495ED513-734B-411F-8C5E-D9DBCB3AD326@cfc-proj2010.net> Hi all, I use Now contact and calendar programs and normally don't have any problems but more recently I keep getting the error Failed Now Contact (0xffffb1ee) actually the whole message after sync is: Sync starting at 11/7/06 9:04 AM (09:04:22) on Bluetooth (5.1.2) TimeCopy: host 2006/11/07 09:04:26, palm 2006/11/07 08:26:38, diff: 2268s OK TimeCopy Documents To Go Message(s) Mellel Registration_1 - Source file cannot be found The item has not been updated on the handheld. Run Documents To Go on the desktop and update the item view to resolve this problem. OK Documents To Go *Created backup file* Failed Now Contact (0xffffb1ee) * Created backup file * OK Now Up-to-Date Sync completed successfully at 11/7/06 9:05 AM (09:05:11) So now it does not want to sync the Now Contact File. When I change the sync settings it tells me that the conduits are not designed for my computer so I am wondering if it could be and intel mac thing but then the conduits I am using came with the latest builds so any help would be appreciated. Thanks J. Mark Dempsey From dmatsmith at earthlink.net Sat Nov 11 10:51:37 2006 From: dmatsmith at earthlink.net (D. Matthew Smith) Date: Sat Nov 11 08:51:44 2006 Subject: [missing-sync-palmos-talk] Sync Problems with Now Contact In-Reply-To: <495ED513-734B-411F-8C5E-D9DBCB3AD326@cfc-proj2010.net> Message-ID: I have has the same error message. Also an Intel computer upgrade. I threw out the Now contacts Preference file and it let me sync the database, however I still get the error but the sync does work. .. > From: James M Dempsey > Reply-To: "The Missing Sync (Mac/Palm OS) Discussion List" > > Date: Sat, 11 Nov 2006 08:45:23 -0500 > To: "The Missing Sync ((Mac/Palm OS)) Discussion List" > > Subject: [missing-sync-palmos-talk] Sync Problems with Now Contact > > ---------------------------------------------------------------------------- > PLEASE NOTE: This mailing list will close permanently on Sunday, November 12, > 2006. User discussion about Mark/Space products will continue in the new > Mark/Space User Forums. http://forums.markspace.com > ---------------------------------------------------------------------------- > Hi all, > > I use Now contact and calendar programs and normally don't have any > problems but more recently I keep getting the error Failed Now > Contact (0xffffb1ee) actually the whole message after sync is: > > Sync starting at 11/7/06 9:04 AM (09:04:22) on Bluetooth (5.1.2) > TimeCopy: host 2006/11/07 09:04:26, palm 2006/11/07 08:26:38, diff: > 2268s > OK TimeCopy > Documents To Go Message(s) > Mellel Registration_1 > - Source file cannot be found > The item has not been updated on the handheld. > Run Documents To Go on the desktop and update the item view to > resolve this problem. > OK Documents To Go > *Created backup file* > Failed Now Contact (0xffffb1ee) > * Created backup file * > OK Now Up-to-Date > Sync completed successfully at 11/7/06 9:05 AM (09:05:11) > > So now it does not want to sync the Now Contact File. When I change > the sync settings it tells me that the conduits are not designed for > my computer so I am wondering if it could be and intel mac thing but > then the conduits I am using came with the latest builds so any help > would be appreciated. > > Thanks > > J. Mark Dempsey > > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > To unsubscribe, send an email (no subject required) from your subscribed email > address to: > missing-sync-palmos-talk-leave@lists.markspace.com From k.dawson at mac.com Sun Nov 12 17:16:07 2006 From: k.dawson at mac.com (k.dawson@mac.com) Date: Sun Nov 12 15:16:14 2006 Subject: [missing-sync-palmos-talk] Sync Problems with Now Contact In-Reply-To: <495ED513-734B-411F-8C5E-D9DBCB3AD326@cfc-proj2010.net> References: <495ED513-734B-411F-8C5E-D9DBCB3AD326@cfc-proj2010.net> Message-ID: <40A0872D-143D-49FF-9CF7-4E0A897B2BF6@mac.com> I actually get something similar using Entourage. When I open the Entourage conduit it says its not designed for this version of Missing Sync. However it still opens and it syncs. I was getting a similar error on backup of my Entourage DB when I sync'd the entire DB. I then switched it to backup the calendar 8 weeks back and it worked. However Entourage only goes up to 8 weeks back then all (3.5 years in my case). So I decided to try iCal and sync 1 year back and that worked. I didn't bother seeing if it would sync my entire iCal calendar as it takes so long to back that up. I thought one year back would be enough. Kerry On Nov 11, 2006, at 8:45 AM, James M Dempsey wrote: > ---------------------------------------------------------------------- > ------ > PLEASE NOTE: This mailing list will close permanently on Sunday, > November 12, 2006. User discussion about Mark/Space products will > continue in the new Mark/Space User Forums. http:// > forums.markspace.com > ---------------------------------------------------------------------- > ------ > Hi all, > > I use Now contact and calendar programs and normally don't have any > problems but more recently I keep getting the error Failed Now > Contact (0xffffb1ee) actually the whole message after sync is: > > Sync starting at 11/7/06 9:04 AM (09:04:22) on Bluetooth (5.1.2) > TimeCopy: host 2006/11/07 09:04:26, palm 2006/11/07 08:26:38, diff: > 2268s > OK TimeCopy > Documents To Go Message(s) > Mellel Registration_1 > - Source file cannot be found > The item has not been updated on the handheld. > Run Documents To Go on the desktop and update the item view to > resolve this problem. > OK Documents To Go > *Created backup file* > Failed Now Contact (0xffffb1ee) > * Created backup file * > OK Now Up-to-Date > Sync completed successfully at 11/7/06 9:05 AM (09:05:11) > > So now it does not want to sync the Now Contact File. When I > change the sync settings it tells me that the conduits are not > designed for my computer so I am wondering if it could be and intel > mac thing but then the conduits I am using came with the latest > builds so any help would be appreciated. > > Thanks > > J. Mark Dempsey > > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > To unsubscribe, send an email (no subject required) from your > subscribed email address to: > missing-sync-palmos-talk-leave@lists.markspace.com From eullman at markspace.com Mon Nov 13 15:52:15 2006 From: eullman at markspace.com (Eric Ullman) Date: Mon Nov 13 13:54:56 2006 Subject: [missing-sync-palmos-talk] This list is now closed Message-ID: Mark/Space would like to thank all of our list members for participating in Missing Sync product discussions over the years. As mentioned previously, we are now closing down our product mailing lists in favor of the new Mark/Space User Forums. Our mailing list software is old and tired, and it's happy to go out to pasture. We invite you to join us in the new Mark/Space User Forums to continue the discussions. Click on over to http:// forums.markspace.com and join in. Thanks again for participating in this list, even if only to read the posts. We hope to "see" you in the forums. This list is now officially CLOSED. Best regards, Eric -- Eric Ullman Director of Marketing Mark/Space, Inc. eullman@markspace.com