[missing-sync-palmos-talk] Missing Sync 5.0.2 causes max cpu usage and fails

[Scott Gruby]

On Dec 6, 2005, at 4:17 PM, Thomas Wurgler wrote:

> Hi again
>
> It's been more than a week since I managed to sync
> succesfully. Even with a very bare bones setup
> synchronization fails. I just tried an install /
> backup / AvantGo / MemoPad / TimeCopy sync and on the
> Palm it just stopped at "Synchronizing MissingSync" -
> I let it run for around 6 hours (I was out anyway). As
> usual it was Conduit Manager that wasn't responding
> when I came back home.
>
> I had really hoped for something that just worked when
> I paid $40 :( - I thought the people were exaggerating
> on versiontracker.com feedback, but it seems they
> weren't. In my case it really does take hours to sync
> - when it finally succeeds (two or three times) - I
> have found no solution that actually works every time
> yet.
>
> There was no feedback from programmers last time (as
> far as I know) - I'm wondering whether this is a known
> problem and it is being addressed or if I should just
> accept that I lost $40 and move on.
>
> I hope I don't offend anyone with my tone, but I am

This is not a known problem. I recommend you contact our support  
folks for assistance; this forum is not a substitute for support and  
the engineers working on the product respond as time permits. I have  
not heard of this before and cannot reproduce it; when you contact  
our support folks, please include as much information as possible  
such as your computer, your handheld, what you have tried to solve  
it, what conduits are turned on (try turning off all conduits and  
restart; see which one is causing the issue), and include a sync log.

Thanks.

--
Scott Gruby
Lead Engineer
Mark/Space, Inc.
<http://www.markspace.com/>

Please visit <http://www.markspace.com/support/> for assistance with  
Mark/Space products.