[missing-sync-palmos-talk] Re: hotsync button ignored

[Brian Hall]

>Recently, (only after any restarts... I think...), I have had to
>manually launch MS to get it to sync. When I press the hotsync button
>on the cradle of my Tungsten C, nothing happens. I then launch MS
>manually on my computer and the sync progress screen pops up and
>starts syncing. After that, if MS is not running syncing again from
>the Tungsten will launch MS.

In addition to the software issues just mentioned (make sure USB sync is
enabled in missing sync preferences), you may also want to check the
physical connection. Sometimes the cable can be connected on somewhat of an
angle and if one side is seated properly, but the other isn't, you can end
up with strange results.

Brian

-- 
_____________________________________________________________________
Mark/Space, Inc.                                   voice 408-293-7299
654 N. Santa Cruz Ave. #300                          fax 408-293-7298
Los Gatos, CA 95030-4360                   <http://www.markspace.com>