From laudema at free.fr Wed Jul 7 00:11:30 2004 From: laudema at free.fr (LD) Date: Tue Jul 6 14:13:37 2004 Subject: [missing-sync-palmos-talk] test and talk treo behind mac, mac behind router Message-ID: <0CFB7824-CF91-11D8-A42D-000393A95684@free.fr> Hello, Seems to be a quiet list :-) Trying to share my internet connection on the mac (G4, mac os 10.3.4) and a few softwarres running together usually nicely .. Share does not work, and it screws up the treo, that was yesterday. Today mac shows me an advice to restart my computer by holding the power key for a long time. What i did ... Back to the mac I went to the console.app, and found there things that could explain some troubles in the start log : > Jul 6 22:31:36 localhost SystemStarter: Demarrage des services > internet > Jul 6 22:31:36 localhost ConsoleMessage: Starting Internet address > sharing > Jul 6 22:31:36 localhost SystemStarter: Starting Internet address > sharing > Jul 6 22:31:36 localhost InternetSharing[357]: InternetSharing > starting > Jul 6 22:31:36 localhost xinetd[352]: attribute disable expects 1 > values and 4 values were specified [line=4] > Jul 6 22:31:36 localhost xinetd[352]: attribute user expects 1 values > and 4 values were specified [line=7] ? > Jul 6 22:31:36 localhost xinetd[352]: Service tftp missing attribute > user - DISABLING tftp I installed for another thing ... > Jul 6 22:31:36 localhost xinetd[352]: xinetd Version 2.3.11 started > with libwrap options compiled in. > Jul 6 22:31:36 localhost xinetd[352]: Started working: 5 available > services > Jul 6 22:31:36 localhost named[359]: starting BIND 9.2.2 -c > /etc/com.apple.named.conf.proxy -f > Jul 6 22:31:36 localhost named[359]: using 1 CPU > Jul 6 22:31:36 localhost bootpd[358]: interface en0: ip > 192.168.123.100 mask 255.255.255.0 > Jul 6 22:31:36 localhost bootpd[358]: interface fw0: ip 192.168.2.1 > mask 255.255.255.0 > Jul 6 22:31:37 localhost named[359]: loading configuration from > '/etc/com.apple.named.conf.proxy' > Jul 6 22:31:37 localhost named[359]: listening on IPv4 interface fw0, > 192.168.2.1#53 > Jul 6 22:31:37 localhost named[359]: none:0: open: > /private/etc/rndc.key: file not found could it be there the trouble ? > Jul 6 22:31:37 localhost named[359]: > /etc/com.apple.named.conf.proxy:7: couldn't install keys for command > channel 127.0.0.1#54: file not found > Jul 6 22:31:37 localhost named[359]: > /etc/com.apple.named.conf.proxy:7: couldn't add command channel > 127.0.0.1#54: file not found > Jul 6 22:31:37 localhost named[359]: zone 0.0.127.in-addr.arpa/IN: > loaded serial 1997022700 > Jul 6 22:31:37 localhost named[359]: zone localhost/IN: loaded serial > 42 > Jul 6 22:31:37 localhost named[359]: running > Jul 6 22:31:37 localhost SystemStarter: The following StartupItems > failed to properly start: > Jul 6 22:31:37 localhost SystemStarter: > /System/Library/StartupItems/CrashReporter > Jul 6 22:31:37 localhost SystemStarter: - execution of Startup > script failed I don't know much about that CrashReporter, will have to see that tomorrow .. > Jul 6 22:31:37 localhost SystemStarter: > Jul 6 22:31:37 localhost SystemStarter: Demarrage de la fenetre > deouverture de session About the treo side it is rather curious : everything seems to start fine, hands shake strongly, I got an IP adress 192.168.206.206 with a gateway at the known mac IP adress 192.168.123.100 and there is a service open named MissinSync. Everything's all right. But it does not works : Connection won't be establish with the pop server neither with the web-server (white page in the browser). Yesterday I got once the page of the router on the lan at 192.168.123.254, but no more. The odd thing is that today I connected through my GPRS connection. It started fine as well and died the same bad way : connected with an IP adress, but unable to get any service. And that time it's no more MissingSync fault. But the only way I know to make things work again is to do a hard reset. Because I did one yesterday morning, after my first tries .. And will do until tomorrow morning again ... I had one mail with Pete but it did not helped me very much, I send him the screen shots of internet sharing preferences ... For my point of view they looked fine, he did not say ... If some body on this peacefull list as an idea ? Thanks in advance Laurent Demaret -- laudema@free.fr From rapsfo at yahoo.com Tue Jul 13 03:30:13 2004 From: rapsfo at yahoo.com (Rob Petsche) Date: Tue Jul 13 02:30:19 2004 Subject: [missing-sync-palmos-talk] request for link to version 2.01 Message-ID: <20040713093013.32277.qmail@web41505.mail.yahoo.com> I am running Palm OS 5.2, connecting via HotSync Manager V3.1, isync V1.4, using a treo 600 and running Mac OS 10.2.8. I cannot mount the SD card from my Treo to my desktop. What steps should I consider when solving this problem. Regards, Robert From ramadonjoe at comcast.net Tue Jul 13 10:24:25 2004 From: ramadonjoe at comcast.net (Len McCawley) Date: Tue Jul 13 06:24:31 2004 Subject: [missing-sync-palmos-talk] request for link to version 2.01 In-Reply-To: <20040713093013.32277.qmail@web41505.mail.yahoo.com> Message-ID: Hi, i am no expert, but hopefully this may help. Which missing sync application are you using? I think there are different application for different functions, one to surf the web/ use advantgo, another application to mount the card to the desk top. lenny On Tuesday, July 13, 2004, at 05:30 AM, Rob Petsche wrote: > > I am running Palm OS 5.2, connecting via HotSync > Manager V3.1, isync V1.4, using a treo 600 and running > Mac OS 10.2.8. I cannot mount the SD card from my Treo > to my desktop. What steps should I consider when > solving this problem. > > Regards, > > Robert > > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > Unsubcribing information, subscription options and list archives can > be found at: > http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk > From kfreeman at markspace.com Tue Jul 13 12:17:58 2004 From: kfreeman at markspace.com (Ken Freeman) Date: Tue Jul 13 11:18:03 2004 Subject: [missing-sync-palmos-talk] request for link to version 2.01 In-Reply-To: References: Message-ID: There is a known bug mounting cards with the Missing Sync version 2.0.2 on mac OS 10.2.8. Robert has been sent a link to download the 2.0.1 version, which works fine with Mac OS X 10.2.8. Ken On Jul 13, 2004, at 6:24 AM, Len McCawley wrote: > Hi, i am no expert, but hopefully this may help. Which missing sync > application are you using? I think there are different application for > different functions, one to surf the web/ use advantgo, another > application to mount the card to the desk top. > lenny > On Tuesday, July 13, 2004, at 05:30 AM, Rob Petsche wrote: > >> >> I am running Palm OS 5.2, connecting via HotSync >> Manager V3.1, isync V1.4, using a treo 600 and running >> Mac OS 10.2.8. I cannot mount the SD card from my Treo >> to my desktop. What steps should I consider when >> solving this problem. >> >> Regards, >> >> Robert >> >> _______________________________________________ >> missing-sync-palmos-talk mailing list >> missing-sync-palmos-talk@lists.markspace.com >> Unsubcribing information, subscription options and list archives can >> be found at: >> http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk >> > > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > Unsubcribing information, subscription options and list archives can > be found at: > http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk > From joshjustice at comcast.net Fri Jul 16 13:46:23 2004 From: joshjustice at comcast.net (Josh Justice) Date: Fri Jul 16 09:46:29 2004 Subject: [missing-sync-palmos-talk] can't mount treo memory card Message-ID: Hi, Just downloaded the Missing Sync but am having trouble mounting my SD memory card on the desktop. I open the Missing Sync app on the PDA and click Connect, but nothing happens on the Mac. I have a Sprint Treo 600 with the latest patch, Mac OS 10.2.8, and Palm Desktop 4.1. I tried doing a soft reset on the PDA, restarting the Mac, and reformatting the memory card. No luck. Any ideas? Thanks! -- Josh From kfreeman at markspace.com Fri Jul 16 12:28:59 2004 From: kfreeman at markspace.com (Ken Freeman) Date: Fri Jul 16 11:29:05 2004 Subject: [missing-sync-palmos-talk] can't mount treo memory card In-Reply-To: References: Message-ID: <012954C2-D756-11D8-805E-000A9570181E@markspace.com> There is a known problem with the Missing Sync 2.0.2 and mounting cards on Mac OS 10.2.8. I can send you a link to download the 2.0.1 version which works fine. The only changes to 2.0.2 were to add support for the palmOne Zire 31 and Zire 72. Since you are using a Treo 600 the 2.0.1 version will suit you fine. Ken On Jul 16, 2004, at 9:46 AM, Josh Justice wrote: > Hi, > > Just downloaded the Missing Sync but am having trouble mounting my SD > memory card on the desktop. I open the Missing Sync app on the PDA and > click Connect, but nothing happens on the Mac. > > I have a Sprint Treo 600 with the latest patch, Mac OS 10.2.8, and > Palm Desktop 4.1. > > I tried doing a soft reset on the PDA, restarting the Mac, and > reformatting the memory card. No luck. > > Any ideas? Thanks! > > -- Josh > > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > Unsubcribing information, subscription options and list archives can > be found at: > http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk > From jtchambliss at gmail.com Thu Jul 29 12:08:52 2004 From: jtchambliss at gmail.com (Jeff Chambliss) Date: Thu Jul 29 10:09:03 2004 Subject: [missing-sync-palmos-talk] iCal, OSX address book categories??? Message-ID: So does version 4 add support for sync of categories? From brian_hall at markspace.com Thu Jul 29 11:38:01 2004 From: brian_hall at markspace.com (Brian Hall) Date: Thu Jul 29 10:37:53 2004 Subject: [missing-sync-palmos-talk] iCal, OSX address book categories??? In-Reply-To: References: Message-ID: >So does version 4 add support for sync of categories? Version 4 supports (and requires for PIM sync) 3rd party conduits. So a conduit (such as iSync or Entourage) will perform the same under Missing Sync v4 as it did under Palm Desktop/HotSync Manager. ie, if it supported categories under Palm Desktop, it will also support them under Missing Sync. We are working with the various PIM sync conduit providers to see that this gets addressed one way or another in the future (ie, that the PIM conduits get improved). Brian -- _____________________________________________________________________ Mark/Space, Inc. voice 408-293-7299 540 N. Santa Cruz Ave. #300 fax 408-293-7298 Los Gatos, CA 95030 From xico at pobox.com Thu Jul 29 15:49:19 2004 From: xico at pobox.com (Francisco Pires) Date: Thu Jul 29 10:51:13 2004 Subject: [missing-sync-palmos-talk] 2.0 -> 4 upg In-Reply-To: References: Message-ID: <9DCBDB00-E187-11D8-9BD3-000A95E813BA@pobox.com> Hi Brian I bought Missing Sync for Palm in July. How I download the upg to 4.0? Thanks From brian_hall at markspace.com Thu Jul 29 11:59:15 2004 From: brian_hall at markspace.com (Brian Hall) Date: Thu Jul 29 10:59:50 2004 Subject: [missing-sync-palmos-talk] 2.0 -> 4 upg In-Reply-To: <9DCBDB00-E187-11D8-9BD3-000A95E813BA@pobox.com> References: <9DCBDB00-E187-11D8-9BD3-000A95E813BA@pobox.com> Message-ID: >I bought Missing Sync for Palm in July. How I download the upg to 4.0? If you qualify for the free upgrade (purchases since late June as I recall), visit http://www.markspace.com/resend-codes.php If you need to purchase an upgrade, visit http://www.markspace.com/palmosupgrade.php Brian -- _____________________________________________________________________ Mark/Space, Inc. voice 408-293-7299 540 N. Santa Cruz Ave. #300 fax 408-293-7298 Los Gatos, CA 95030 From xico at pobox.com Thu Jul 29 16:23:17 2004 From: xico at pobox.com (Francisco Pires) Date: Thu Jul 29 11:25:44 2004 Subject: [missing-sync-palmos-talk] 2.0 -> 4 upg In-Reply-To: References: <9DCBDB00-E187-11D8-9BD3-000A95E813BA@pobox.com> Message-ID: <5CBEEA1C-E18C-11D8-9BD3-000A95E813BA@pobox.com> Thank you! Em 29/07/2004, ?s 14:59, Brian Hall escreveu: >> I bought Missing Sync for Palm in July. How I download the upg to 4.0? > > If you qualify for the free upgrade (purchases since late June as I > recall), visit http://www.markspace.com/resend-codes.php > > If you need to purchase an upgrade, visit > http://www.markspace.com/palmosupgrade.php > > Brian > > -- > _____________________________________________________________________ > Mark/Space, Inc. voice 408-293-7299 > 540 N. Santa Cruz Ave. #300 fax 408-293-7298 > Los Gatos, CA 95030 > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > Unsubcribing information, subscription options and list archives can > be found at: > http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk > From xico at pobox.com Thu Jul 29 16:47:52 2004 From: xico at pobox.com (Francisco Pires) Date: Thu Jul 29 11:49:49 2004 Subject: [missing-sync-palmos-talk] 2.0 -> 4 upg In-Reply-To: <5CBEEA1C-E18C-11D8-9BD3-000A95E813BA@pobox.com> References: <9DCBDB00-E187-11D8-9BD3-000A95E813BA@pobox.com> <5CBEEA1C-E18C-11D8-9BD3-000A95E813BA@pobox.com> Message-ID: I downloaded version 4.0, but when I put my reg code I received this message: Registration Code is Invalid. > > > Em 29/07/2004, ?s 14:59, Brian Hall escreveu: > >>> I bought Missing Sync for Palm in July. How I download the upg to >>> 4.0? >> >> If you qualify for the free upgrade (purchases since late June as I >> recall), visit http://www.markspace.com/resend-codes.php >> >> If you need to purchase an upgrade, visit >> http://www.markspace.com/palmosupgrade.php >> >> Brian >> >> -- >> _____________________________________________________________________ >> Mark/Space, Inc. voice 408-293-7299 >> 540 N. Santa Cruz Ave. #300 fax 408-293-7298 >> Los Gatos, CA 95030 >> _______________________________________________ >> missing-sync-palmos-talk mailing list >> missing-sync-palmos-talk@lists.markspace.com >> Unsubcribing information, subscription options and list archives can >> be found at: >> http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk >> > > > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > Unsubcribing information, subscription options and list archives can > be found at: > http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk > From brian_hall at markspace.com Thu Jul 29 12:57:04 2004 From: brian_hall at markspace.com (Brian Hall) Date: Thu Jul 29 12:02:09 2004 Subject: [missing-sync-palmos-talk] 2.0 -> 4 upg In-Reply-To: References: <9DCBDB00-E187-11D8-9BD3-000A95E813BA@pobox.com> <5CBEEA1C-E18C-11D8-9BD3-000A95E813BA@pobox.com> Message-ID: >I downloaded version 4.0, but when I put my reg code I received this >message: > >Registration Code is Invalid. You need to use the code that you get either via purchase (of 4.0), or via resend-codes (if you qualified for the free upgrade). You can not use your old reg code from the original purchase. Brian -- _____________________________________________________________________ Mark/Space, Inc. voice 408-293-7299 540 N. Santa Cruz Ave. #300 fax 408-293-7298 Los Gatos, CA 95030 From ghenshaw at altera.com Thu Jul 29 17:47:11 2004 From: ghenshaw at altera.com (Glenn Henshaw) Date: Thu Jul 29 13:47:41 2004 Subject: [missing-sync-palmos-talk] 2.0 -> 4 upg In-Reply-To: Message-ID: I found the same, but figured out how to fix it. On 7/29/04 2:47 PM, "Francisco Pires" wrote: > > I downloaded version 4.0, but when I put my reg code I received this > message: > > Registration Code is Invalid. > > > > >> >> >> Em 29/07/2004, ?s 14:59, Brian Hall escreveu: >> >>>> I bought Missing Sync for Palm in July. How I download the upg to >>>> 4.0? >>> >>> If you qualify for the free upgrade (purchases since late June as I >>> recall), visit http://www.markspace.com/resend-codes.php >>> >>> If you need to purchase an upgrade, visit >>> http://www.markspace.com/palmosupgrade.php >>> >>> Brian >>> >>> -- >>> _____________________________________________________________________ >>> Mark/Space, Inc. voice 408-293-7299 >>> 540 N. Santa Cruz Ave. #300 fax 408-293-7298 >>> Los Gatos, CA 95030 >>> _______________________________________________ >>> missing-sync-palmos-talk mailing list >>> missing-sync-palmos-talk@lists.markspace.com >>> Unsubcribing information, subscription options and list archives can >>> be found at: >>> http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk >>> >> >> >> _______________________________________________ >> missing-sync-palmos-talk mailing list >> missing-sync-palmos-talk@lists.markspace.com >> Unsubcribing information, subscription options and list archives can >> be found at: >> http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk >> > > > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > Unsubcribing information, subscription options and list archives can be > found at: > http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk -- Glenn Henshaw Altera Ottawa Technology Center Phone: (613) 591-6702 Email: ghenshaw@altera.com From jtchambliss at gmail.com Thu Jul 29 15:55:47 2004 From: jtchambliss at gmail.com (Jeff Chambliss) Date: Thu Jul 29 13:55:52 2004 Subject: [missing-sync-palmos-talk] Re: 2.0 -> 4 upg Message-ID: Upgrade for purchases since late June??? I bought v2.0 at the end of April...any chance of throwing me a bone at a free upgrade to 4.0. From laudema at free.fr Thu Jul 29 23:56:32 2004 From: laudema at free.fr (LD) Date: Thu Jul 29 13:56:39 2004 Subject: [missing-sync-palmos-talk] 2.0 -> 4 upg In-Reply-To: References: <9DCBDB00-E187-11D8-9BD3-000A95E813BA@pobox.com> <5CBEEA1C-E18C-11D8-9BD3-000A95E813BA@pobox.com> Message-ID: Hello, Same here (and the code looks like the old one ?) Best laurent demaret Le 29 juil. 04, ? 20:47, Francisco Pires a ?crit : > > Registration Code is Invalid. > From brian_hall at markspace.com Thu Jul 29 15:26:59 2004 From: brian_hall at markspace.com (Brian Hall) Date: Thu Jul 29 14:27:50 2004 Subject: [missing-sync-palmos-talk] 2.0 -> 4 upg In-Reply-To: References: <9DCBDB00-E187-11D8-9BD3-000A95E813BA@pobox.com> <5CBEEA1C-E18C-11D8-9BD3-000A95E813BA@pobox.com> Message-ID: There seems to be an issue with resend-codes for people that qualify for the free upgrade. We're working on it. Brian >Hello, > >Same here (and the code looks like the old one ?) > >Best > >laurent demaret >Le 29 juil. 04, ? 20:47, Francisco Pires a ?crit : > >> >> Registration Code is Invalid. >> > > >_______________________________________________ >missing-sync-palmos-talk mailing list >missing-sync-palmos-talk@lists.markspace.com >Unsubcribing information, subscription options and list archives can be >found at: >http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk -- _____________________________________________________________________ Mark/Space, Inc. voice 408-293-7299 540 N. Santa Cruz Ave. #300 fax 408-293-7298 Los Gatos, CA 95030 From xico at pobox.com Thu Jul 29 19:26:06 2004 From: xico at pobox.com (Francisco Pires) Date: Thu Jul 29 14:28:05 2004 Subject: [missing-sync-palmos-talk] 2.0 -> 4 upg In-Reply-To: References: <9DCBDB00-E187-11D8-9BD3-000A95E813BA@pobox.com> <5CBEEA1C-E18C-11D8-9BD3-000A95E813BA@pobox.com> Message-ID: I'm using the reg code that I received with the link to download. I typed it, and after a "verify registration code" I receive the message error (attached). This is the reg codes that I received: Hotsync Name/Device Hash: Francisco Regcode: 130562212002 (Serial Number: 314-55039-70173) -------------- next part -------------- Em 29/07/2004, ?s 15:57, Brian Hall escreveu: >> I downloaded version 4.0, but when I put my reg code I received this >> message: >> >> Registration Code is Invalid. > > You need to use the code that you get either via purchase (of 4.0), or > via > resend-codes (if you qualified for the free upgrade). > > You can not use your old reg code from the original purchase. > > Brian > > -- > _____________________________________________________________________ > Mark/Space, Inc. voice 408-293-7299 > 540 N. Santa Cruz Ave. #300 fax 408-293-7298 > Los Gatos, CA 95030 > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > Unsubcribing information, subscription options and list archives can > be found at: > http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk > From brian_hall at markspace.com Thu Jul 29 15:28:59 2004 From: brian_hall at markspace.com (Brian Hall) Date: Thu Jul 29 14:29:48 2004 Subject: [missing-sync-palmos-talk] Re: 2.0 -> 4 upg In-Reply-To: References: Message-ID: >Upgrade for purchases since late June??? > >I bought v2.0 at the end of April...any chance of throwing me a bone >at a free upgrade to 4.0. FWIW, 2.0 was $29.95 and 3.0 is $39.95, so it ends up being a $10 delta and we packed ALOT of new stuff in this version... This was the single largest project (time, effort, expense, scope) we have ever taken on. Brian -- _____________________________________________________________________ Mark/Space, Inc. voice 408-293-7299 540 N. Santa Cruz Ave. #300 fax 408-293-7298 Los Gatos, CA 95030 From xico at pobox.com Thu Jul 29 19:33:09 2004 From: xico at pobox.com (Francisco Pires) Date: Thu Jul 29 14:35:06 2004 Subject: [missing-sync-palmos-talk] 2.0 -> 4 upg In-Reply-To: References: <9DCBDB00-E187-11D8-9BD3-000A95E813BA@pobox.com> <5CBEEA1C-E18C-11D8-9BD3-000A95E813BA@pobox.com> Message-ID: Yes, the code looks like the old one too... :((( Em 29/07/2004, ?s 17:56, LD escreveu: > Hello, > > Same here (and the code looks like the old one ?) > > Best > > laurent demaret > Le 29 juil. 04, ? 20:47, Francisco Pires a ?crit : > >> >> Registration Code is Invalid. >> > > > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > Unsubcribing information, subscription options and list archives can > be found at: > http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk > From xico at pobox.com Thu Jul 29 20:08:56 2004 From: xico at pobox.com (Francisco Pires) Date: Thu Jul 29 15:10:51 2004 Subject: [missing-sync-palmos-talk] 2.0 -> 4 upg In-Reply-To: References: <9DCBDB00-E187-11D8-9BD3-000A95E813BA@pobox.com> <5CBEEA1C-E18C-11D8-9BD3-000A95E813BA@pobox.com> Message-ID: Is there a date to correct this? Now I can't sync with Palm Desktop... need to reinstall it... :( Em 29/07/2004, ?s 18:26, Brian Hall escreveu: > There seems to be an issue with resend-codes for people that qualify > for > the free upgrade. We're working on it. > > Brian > >> Hello, >> >> Same here (and the code looks like the old one ?) >> >> Best >> >> laurent demaret >> Le 29 juil. 04, ? 20:47, Francisco Pires a ?crit : >> >>> >>> Registration Code is Invalid. >>> >> >> >> _______________________________________________ >> missing-sync-palmos-talk mailing list >> missing-sync-palmos-talk@lists.markspace.com >> Unsubcribing information, subscription options and list archives can >> be >> found at: >> http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk > > -- > _____________________________________________________________________ > Mark/Space, Inc. voice 408-293-7299 > 540 N. Santa Cruz Ave. #300 fax 408-293-7298 > Los Gatos, CA 95030 > > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > Unsubcribing information, subscription options and list archives can > be found at: > http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk > From jason at ophiochos.org.uk Fri Jul 30 01:30:43 2004 From: jason at ophiochos.org.uk (Jason Davies) Date: Thu Jul 29 16:27:39 2004 Subject: [missing-sync-palmos-talk] 2.0 -> 4 upg In-Reply-To: Message-ID: I have a Tungsten T and have been hoping to get wi-fi somehow. Is there a wi-fi card I can use? I have BT but it's soooo slow... From jason at ophiochos.org.uk Fri Jul 30 01:43:05 2004 From: jason at ophiochos.org.uk (Jason Davies) Date: Thu Jul 29 16:39:50 2004 Subject: [missing-sync-palmos-talk] keyboard bug In-Reply-To: Message-ID: does anyone know whether this software will cure the 'keyboard active' bug in PD? where if they thin keyboard is enabled, and you hotsync via cradle, it usually crashes the Palm? From sgruby at markspace.com Thu Jul 29 19:40:38 2004 From: sgruby at markspace.com (Scott Gruby) Date: Thu Jul 29 18:40:44 2004 Subject: [missing-sync-palmos-talk] keyboard bug In-Reply-To: References: Message-ID: <75D48514-E1C9-11D8-95D8-000D932F4F94@markspace.com> On Jul 29, 2004, at 4:43 PM, Jason Davies wrote: > does anyone know whether this software will cure the 'keyboard active' > bug in PD? where if they thin keyboard is enabled, and you hotsync via > cradle, it usually crashes the Palm? > This is a device side issue that you should take up with palmOne and/or Think Outside (the developers of the keyboard). Missing Sync is a replacement for the desktop components and doesn't affect the handheld. -- Scott Gruby Lead Engineer Mark/Space, Inc. From trentsongs at att.net Thu Jul 29 23:13:58 2004 From: trentsongs at att.net (Darrell Trent) Date: Thu Jul 29 20:14:10 2004 Subject: [missing-sync-palmos-talk] Message-ID: <7F9B9816-E1D6-11D8-9D80-003065B82D04@att.net> I just downloaded and installed MissingSync 4.0 to my Mac G4 450DP under 10.2.8. The installation seemed to go fine all the way through registration. I unchecked several 3rd party conduits and closed the dialog box. Now, every time I launch MS 4.0 the conduit dialog displays for 1 second and then immediately quits. I have not been able to perform even one single hotsync - not even to install the MissingSync .prc How can this be corrected? Darrell Trent Green Trentsongs@att.net God Loves You! <))))>< From trentsongs at att.net Thu Jul 29 23:13:58 2004 From: trentsongs at att.net (Darrell Trent) Date: Thu Jul 29 20:16:35 2004 Subject: [missing-sync-palmos-talk] MS 4.0 crashes: won't hotsync Message-ID: I just downloaded and installed MissingSync 4.0 to my Mac G4 450DP under 10.2.8. The installation seemed to go fine all the way through registration. I unchecked several 3rd party conduits and closed the dialog box. Now, every time I launch MS 4.0 the conduit dialog displays for 1 second and then immediately quits. I have not been able to perform even one single hotsync - not even to install the MissingSync .prc How can this be corrected? Darrell Trent Green Trentsongs@att.net God Loves You! <))))>< Darrell Trent Green Trentsongs@att.net God Loves You! <))))>< From ken at devhouse.com Thu Jul 29 23:45:10 2004 From: ken at devhouse.com (Ken) Date: Thu Jul 29 20:45:10 2004 Subject: [missing-sync-palmos-talk] Installing Missing Sync for Palm OS v4 on 10.2.8 - Looping Message-ID: <1091159110.4109c446d1f77@www.devhouse.com> I've been trying to install Missing Sync for Palm OS 4 since the upgrade was 19.95. Everytime I try, it would start to unpack/install the files but when it gets to the 135th file left, it comes back to the installation window with the buttons Quit / Install. I have uninstalled the previous version of Missing Sync by the uninstaller provided. Removed the Palm Desktop, still no luck... Also, when unpacking/installing, the directory is not being created. I can manually create the directory, so any suggestions at this time, I'd appreciate it. Thanks in advance. Ken From luke at shrimper.org.uk Fri Jul 30 11:31:44 2004 From: luke at shrimper.org.uk (Luke Bosman) Date: Fri Jul 30 02:31:55 2004 Subject: [missing-sync-palmos-talk] Installing Missing Sync for Palm OS v4 on 10.2.8 - Looping Message-ID: <4528A8CB-E20B-11D8-A0AB-0003930DB12A@shrimper.org.uk> > I've been trying to install Missing Sync for Palm OS 4 since the > upgrade was > 19.95. Everytime I try, it would start to unpack/install the files > but when it > gets to the 135th file left, it comes back to the installation window > with the > buttons Quit / Install. I have uninstalled the previous version of > Missing > Sync by the uninstaller provided. Removed the Palm Desktop, still no > luck... That sounds similar to my experiences. Indeed, my install ceased at the same file. I have kept the previous version of MS as well as Palm Desktop, but... I succeeded in installing the software this by using my wife's user account (we're both administrators) but can now only synchronise if logged in as her. If I log in as myself the software starts, gives me a spinning beach ball for thirty seconds or so and then quits. I've looked for a crash log and cannot find one. I'm running OS X.3.4 on an iMac G3 500 with 384 megabytes. Cheers, Luke From jason at ophiochos.org.uk Fri Jul 30 11:38:31 2004 From: jason at ophiochos.org.uk (Jason Davies) Date: Fri Jul 30 02:35:24 2004 Subject: [missing-sync-palmos-talk] enforced registration?! In-Reply-To: Message-ID: OK I paid my money and downloaded MS 4, tried to install on my laptop - which is not connected to the net - and get stuck at this registration window that demands I reconfigure my computer so it can verify the key. I understand you don't want pirate copies floating around but this is something I have never had to do on a mac before. It's what Microsoft do, and they are hated for it. I really dislike this kind of policy myself and if I had known I would have thought long and hard about upgrading Missing Sync. So now I have to go round to a friend's to use their internet connection. Lucky it was a laptop, eh? From jason at ophiochos.org.uk Fri Jul 30 11:43:06 2004 From: jason at ophiochos.org.uk (Jason Davies) Date: Fri Jul 30 02:39:31 2004 Subject: [missing-sync-palmos-talk] Installing Missing Sync for Palm OS v4 on 10.2.8 - Looping In-Reply-To: <4528A8CB-E20B-11D8-A0AB-0003930DB12A@shrimper.org.uk> Message-ID: >I'm running OS X.3.4 on an iMac G3 500 with 384 megabytes. I don't know for certain but these thigns are usually solved by repairing disk permissions and/or running something like Diskwarrior From dmjossel at synfibers.com Fri Jul 30 17:47:15 2004 From: dmjossel at synfibers.com (David M. Josselyn) Date: Fri Jul 30 02:47:10 2004 Subject: [missing-sync-palmos-talk] Missing Sync 4 quits on start In-Reply-To: <4528A8CB-E20B-11D8-A0AB-0003930DB12A@shrimper.org.uk> Message-ID: I have just installed Missing Sync 4.0 on a Powerbook G4 running OS X 10.3.4 and Entourage X 10.1.4. Installation of MS 4 went fine, but it will not sync. The application quits silently and immediatlely at startup-- the window flashes on the screen for a mere fraction of the second. There are no messages about it in the console, and no error dialog. Attempting to sync produces the same effect; sync starts and then stops without any error. From luke at shrimper.org.uk Fri Jul 30 11:54:05 2004 From: luke at shrimper.org.uk (Luke Bosman) Date: Fri Jul 30 02:54:12 2004 Subject: [missing-sync-palmos-talk] Installing Missing Sync for Palm OS v4 on 10.2.8 - Looping In-Reply-To: References: Message-ID: <64F6B046-E20E-11D8-A0AB-0003930DB12A@shrimper.org.uk> On 30 Jul 2004, at 10:43, Jason Davies wrote: >> I'm running OS X.3.4 on an iMac G3 500 with 384 megabytes. > > > I don't know for certain but these thigns are usually solved by > repairing disk permissions and/or running something like Diskwarrior Sorry, I forgot to mention that I did repair permissions. Cheers, Luke From rmaehl at bigpond.net.au Fri Jul 30 21:01:05 2004 From: rmaehl at bigpond.net.au (Russ Maehl) Date: Fri Jul 30 03:01:17 2004 Subject: [missing-sync-palmos-talk] Installing Missing Sync for Palm OS v4 on 10.2.8 - Looping In-Reply-To: <64F6B046-E20E-11D8-A0AB-0003930DB12A@shrimper.org.uk> Message-ID: I have tried installing the software on both my home and office computers and get the same problem being discussed here. I start up the program, it runs, but I cannot change the settings for the individuals conduits. I try hotsyncing, but the Palm won't connect. I try dragging .prc files into install but they won't stick. I then quit the program and run it again but now the program stays up for a second and then quits. Both computers behaved identically. I had to reinstall the Palm software at the office....very painful. Had to uninstall Missing Sync, and then reinstall Palm. In the process confusion begins to reign with the Palm Background application and the Transport Monitor which is required for Palm hotsync. Not fun....hoping an answer will arrive soon so I don't have to repeat this reinstall at home. Russ On 30/7/04 7:54 PM, "Luke Bosman" wrote: > > On 30 Jul 2004, at 10:43, Jason Davies wrote: > >>> I'm running OS X.3.4 on an iMac G3 500 with 384 megabytes. >> >> >> I don't know for certain but these thigns are usually solved by >> repairing disk permissions and/or running something like Diskwarrior > > Sorry, I forgot to mention that I did repair permissions. > > Cheers, > Luke > > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > Unsubcribing information, subscription options and list archives can be found > at: > http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk From mmurray at maths.adelaide.edu.au Fri Jul 30 21:10:51 2004 From: mmurray at maths.adelaide.edu.au (Michael Murray) Date: Fri Jul 30 03:40:59 2004 Subject: [missing-sync-palmos-talk] Missing Sync 4 quits on start In-Reply-To: References: Message-ID: >I have just installed Missing Sync 4.0 on a Powerbook G4 running OS X 10.3.4 >and Entourage X 10.1.4. > >Installation of MS 4 went fine, but it will not sync. The application quits >silently and immediatlely at startup-- the window flashes on the screen for >a mere fraction of the second. There are no messages about it in the >console, and no error dialog. > >Attempting to sync produces the same effect; sync starts and then stops >without any error. > >_______________________________________________ >missing-sync-palmos-talk mailing list >missing-sync-palmos-talk@lists.markspace.com >Unsubcribing information, subscription options and list archives can >be found at: >http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk Hi I had this problem. Does it work immediately after you register ? If so try the following. Open ~/Library/Preferences/com.markspace.missingsync.palmos.plist in a text editor and look for a line like Registration Code 1234567890 (Serial Number: Error, please contact s where the numbers are different. If you find a line like this replace it by Registration Code 1234567890 and save. In my case this enabled me to launch the app again and sync. I have reported this to Mark/Space Support. Mihcael -- .......................................................... Michael Murray Professor of Pure Mathematics Head of School School of Mathematical Sciences Fax: 61+ 8 8303 3696 University of Adelaide Phone: 61+ 8 8303 4174 Australia 5005 Email: mmurray@maths.adelaide.edu.au Web: http://www.maths.adelaide.edu.au/~mmurray CRICOS Provider Number 00123M This email message is intended only for the addressee(s) and contains information that may be confidential and/or copyright. If you are not the intended recipient please notify the sender by reply email and immediately delete this email. Use, disclosure or reproduction of this email by anyone other than the intended recipient(s) is strictly prohibited. No representation is made that this email or any attachments are free of viruses. Virus scanning is recommended and is the responsibility of the recipient. .......................................................... From dmjossel at synfibers.com Fri Jul 30 19:04:44 2004 From: dmjossel at synfibers.com (David M. Josselyn) Date: Fri Jul 30 04:04:44 2004 Subject: [missing-sync-palmos-talk] Missing Sync 4 quits on start In-Reply-To: Message-ID: Thanks! That worked like a charm. On 7/30/04 17:40, "Michael Murray" wrote: >> I have just installed Missing Sync 4.0 on a Powerbook G4 running OS X 10.3.4 >> and Entourage X 10.1.4. >> >> Installation of MS 4 went fine, but it will not sync. The application quits >> silently and immediatlely at startup-- the window flashes on the screen for >> a mere fraction of the second. There are no messages about it in the >> console, and no error dialog. >> >> Attempting to sync produces the same effect; sync starts and then stops >> without any error. >> >> _______________________________________________ >> missing-sync-palmos-talk mailing list >> missing-sync-palmos-talk@lists.markspace.com >> Unsubcribing information, subscription options and list archives can >> be found at: >> http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk > > > > Hi > > I had this problem. Does it work immediately after you register ? If so > try the following. Open > ~/Library/Preferences/com.markspace.missingsync.palmos.plist > > in a text editor and look for a line like > > Registration Code > 1234567890 (Serial Number: Error, please contact s > > where the numbers are different. If you find a line like this replace it by > > Registration Code > 1234567890 > > > and save. In my case this enabled me to launch the app again and sync. > > I have reported this to Mark/Space Support. > > > Mihcael ------------------------------------------------------------ David M. Josselyn Synfibers Consulting http://www.synfibers.com dmjossel@synfibers.com From jason at ophiochos.org.uk Fri Jul 30 13:38:12 2004 From: jason at ophiochos.org.uk (Jason Davies) Date: Fri Jul 30 04:35:19 2004 Subject: [missing-sync-palmos-talk] MacNoteTaker chokes.... Message-ID: has anyone else experienced sync failures for MacNoteTaker? The sync process seems to quit reliably here. Which is a shame as it's my most important conduit:-) I will preparae a proper bug report for MarkSpace but wanted to see if there was any difference/similarity out there. From luke at shrimper.org.uk Fri Jul 30 13:44:00 2004 From: luke at shrimper.org.uk (Luke Bosman) Date: Fri Jul 30 04:44:12 2004 Subject: [missing-sync-palmos-talk] Missing Sync 4 quits on start In-Reply-To: References: Message-ID: On 30 Jul 2004, at 11:40, Michael Murray wrote: > I had this problem. Does it work immediately after you register ? If > so > try the following. Open > ~/Library/Preferences/com.markspace.missingsync.palmos.plist > > in a text editor and look for a line like > > Registration Code > 1234567890 (Serial Number: Error, please contact s > > where the numbers are different. If you find a line like this replace > it by > > Registration Code > 1234567890 > > > and save. In my case this enabled me to launch the app again and sync. Thank you very much, you're a good man. My T|E is syncing as I write. Cheers, Luke From mmurray at maths.adelaide.edu.au Fri Jul 30 22:19:39 2004 From: mmurray at maths.adelaide.edu.au (Michael Murray) Date: Fri Jul 30 04:49:48 2004 Subject: [missing-sync-palmos-talk] MacNoteTaker chokes.... In-Reply-To: References: Message-ID: >has anyone else experienced sync failures for MacNoteTaker? The sync >process seems to quit reliably here. Which is a shame as it's my most >important conduit:-) I will preparae a proper bug report for MarkSpace >but wanted to see if there was any difference/similarity out there. > Hi Jason Its OK for me. ------------------------------------------------------------------ Sync starting at 30/7/04 8:40 PM on USB Installed Missing Sync OK Install TimeCopy: host 2004/07/30 20:40:29, palm 2004/07/30 20:40:30, diff: -1s OK TimeCopy Please unlock the Web Confidential database on the Palm first. OK Confidential OK Documents To Go OK MacNoteTaker OK MAL Conduit OK Note Pad 30/7/04 8:41 PM Organizer: Sync Started (Version 3.0.0). 30/7/04 8:41 PM Conduit initialized successfully. 30/7/04 8:41 PM Syncing To-Dos. PalmPilot Records To Fast-Sync : 0 Organizer Records To Consider For Fast-Sync : 44 30/7/04 8:41 PM Syncing Memos. PalmPilot Records To Fast-Sync : 0 Organizer Records To Consider For Fast-Sync : 55 30/7/04 8:41 PM Syncing Datebook. PalmPilot Records To Fast-Sync : 0 Organizer Records To Consider For Fast-Sync : 3280 30/7/04 8:41 PM Syncing Addresses. PalmPilot Records To Fast-Sync : 1 Organizer Records To Consider For Fast-Sync : 108 30/7/04 8:41 PM Sync Ended. OK OrganizerConduit OK Adobe Reader OK Install Backed up AddressDB.pdb Backed up DatebookDB.pdb Backed up psysLaunchDB.pdb Backed up AvGoPimPod1.prc Backed up Saved Preferences.prc OK Backup Sync completed successfully at 30/7/04 8:42 PM ----------------------------------------------------------- Michael -- .......................................................... Michael Murray Professor of Pure Mathematics Head of School School of Mathematical Sciences Fax: 61+ 8 8303 3696 University of Adelaide Phone: 61+ 8 8303 4174 Australia 5005 Email: mmurray@maths.adelaide.edu.au Web: http://www.maths.adelaide.edu.au/~mmurray CRICOS Provider Number 00123M This email message is intended only for the addressee(s) and contains information that may be confidential and/or copyright. If you are not the intended recipient please notify the sender by reply email and immediately delete this email. Use, disclosure or reproduction of this email by anyone other than the intended recipient(s) is strictly prohibited. No representation is made that this email or any attachments are free of viruses. Virus scanning is recommended and is the responsibility of the recipient. .......................................................... From jason at ophiochos.org.uk Fri Jul 30 14:12:44 2004 From: jason at ophiochos.org.uk (Jason Davies) Date: Fri Jul 30 05:09:34 2004 Subject: [missing-sync-palmos-talk] MacNoteTaker chokes.... In-Reply-To: Message-ID: > >Hi Jason > >Its OK for me. hmm, okay, so it's *me*. thanks for that. will experiment further, cheers. From sgruby at markspace.com Fri Jul 30 07:38:44 2004 From: sgruby at markspace.com (Scott Gruby) Date: Fri Jul 30 06:38:49 2004 Subject: [missing-sync-palmos-talk] Missing Sync 4 quits on start In-Reply-To: References: Message-ID: On Jul 30, 2004, at 3:40 AM, Michael Murray wrote: > Hi > > I had this problem. Does it work immediately after you register ? If > so > try the following. Open > ~/Library/Preferences/com.markspace.missingsync.palmos.plist > > in a text editor and look for a line like > > Registration Code > 1234567890 (Serial Number: Error, please contact s > > where the numbers are different. If you find a line like this replace > it by > > Registration Code > 1234567890 > > > and save. In my case this enabled me to launch the app again and sync. > > I have reported this to Mark/Space Support. > > > Thank you for reporting this; while we have not seen this issue ourselves, it does sound plausible and there are a few places that we can add code to protect against this case. -- Scott Gruby Lead Engineer Mark/Space, Inc. From jason at ophiochos.org.uk Fri Jul 30 15:55:03 2004 From: jason at ophiochos.org.uk (Jason Davies) Date: Fri Jul 30 06:51:51 2004 Subject: [missing-sync-palmos-talk] MacNoteTaker chokes.... In-Reply-To: Message-ID: >has anyone else experienced sync failures for MacNoteTaker? could anyone check something for me quickly on this so I can send a proper bug report when I finalise it? backup (to be sure!) create a new MacNoteTaker document. call it something: something else (like 'Definitions: Education). the colon's the important bit... use the command 'rename line 1' What should happen is the colon should become a hyphen in the title shown by MNT ("Definitions - Education"). sync and see if it works. If that works, please rename the file "Definitions - Education" to 'Definitions: Education' within MNT and try again. I think this is why it is failing but worth checking once again that I am not experiencing some other local bug. I am testing this against two macs, one with MS and one with PD/Hotsync manager and getting rather erratic results...:-) From mmurray at maths.adelaide.edu.au Sat Jul 31 00:37:48 2004 From: mmurray at maths.adelaide.edu.au (Michael Murray) Date: Fri Jul 30 07:07:57 2004 Subject: [missing-sync-palmos-talk] MacNoteTaker chokes.... In-Reply-To: References: Message-ID: Hi Jason Following your suggestion I get a failure on the second hot sync: Sync starting at 30/7/04 11:34 PM on USB OK Install TimeCopy: host 2004/07/30 23:34:33, palm 2004/07/30 23:34:32, diff: 1s OK TimeCopy Please unlock the Web Confidential database on the Palm first. OK Confidential OK Documents To Go OK MacNoteTaker OK MAL Conduit OK Note Pad 30/7/04 11:35 PM Organizer: Sync Started (Version 3.0.0). 30/7/04 11:35 PM Conduit initialized successfully. 30/7/04 11:35 PM Syncing To-Dos. PalmPilot Records To Fast-Sync : 0 Organizer Records To Consider For Fast-Sync : 44 30/7/04 11:35 PM Syncing Memos. PalmPilot Records To Fast-Sync : 0 Organizer Records To Consider For Fast-Sync : 55 30/7/04 11:35 PM Syncing Datebook. PalmPilot Records To Fast-Sync : 0 Organizer Records To Consider For Fast-Sync : 3279 30/7/04 11:35 PM Syncing Addresses. PalmPilot Records To Fast-Sync : 0 Organizer Records To Consider For Fast-Sync : 109 30/7/04 11:35 PM Sync Ended. OK OrganizerConduit OK Adobe Reader OK Install Sync completed successfully at 30/7/04 11:35 PM ------------------------------------------------------------------ Sync starting at 30/7/04 11:36 PM on USB OK Install TimeCopy: host 2004/07/30 23:36:43, palm 2004/07/30 23:36:43, diff: 0s OK TimeCopy Please unlock the Web Confidential database on the Palm first. OK Confidential OK Documents To Go Michael -- .......................................................... Michael Murray Professor of Pure Mathematics Head of School School of Mathematical Sciences Fax: 61+ 8 8303 3696 University of Adelaide Phone: 61+ 8 8303 4174 Australia 5005 Email: mmurray@maths.adelaide.edu.au Web: http://www.maths.adelaide.edu.au/~mmurray CRICOS Provider Number 00123M This email message is intended only for the addressee(s) and contains information that may be confidential and/or copyright. If you are not the intended recipient please notify the sender by reply email and immediately delete this email. Use, disclosure or reproduction of this email by anyone other than the intended recipient(s) is strictly prohibited. No representation is made that this email or any attachments are free of viruses. Virus scanning is recommended and is the responsibility of the recipient. .......................................................... From jason at ophiochos.org.uk Fri Jul 30 16:15:02 2004 From: jason at ophiochos.org.uk (Jason Davies) Date: Fri Jul 30 07:11:42 2004 Subject: [missing-sync-palmos-talk] MacNoteTaker chokes.... In-Reply-To: Message-ID: > >Following your suggestion I get a failure on the second hot sync: thanks. It seems that the conduit really dislikes having colons in the title of documents. HSM also seems to choke - usually- on this so the bug may be in MNT not either of the conduit managers. Still trying to get this thing sorted - all kinds of strange errors occurring (often user ones...) So at least, a tip for user of MacNoteTaker -avoid colons in titles! From mmurray at maths.adelaide.edu.au Sat Jul 31 01:13:28 2004 From: mmurray at maths.adelaide.edu.au (Michael Murray) Date: Fri Jul 30 07:43:38 2004 Subject: [missing-sync-palmos-talk] backup failing In-Reply-To: References: Message-ID: My backup conduit often fails. It doesn't seem to like the DateBook.DB which is 157k. It often fails around that point. I don't mind not having a backup as I backup to an SD card everynight but not having a backup means I lose the syncing functionality of BrainForest which uses the Backup as a sort of sync. Michael -- .......................................................... Michael Murray Professor of Pure Mathematics Head of School School of Mathematical Sciences Fax: 61+ 8 8303 3696 University of Adelaide Phone: 61+ 8 8303 4174 Australia 5005 Email: mmurray@maths.adelaide.edu.au Web: http://www.maths.adelaide.edu.au/~mmurray CRICOS Provider Number 00123M This email message is intended only for the addressee(s) and contains information that may be confidential and/or copyright. If you are not the intended recipient please notify the sender by reply email and immediately delete this email. Use, disclosure or reproduction of this email by anyone other than the intended recipient(s) is strictly prohibited. No representation is made that this email or any attachments are free of viruses. Virus scanning is recommended and is the responsibility of the recipient. .......................................................... From praffert at mac.com Fri Jul 30 12:37:06 2004 From: praffert at mac.com (Peter Rafferty) Date: Fri Jul 30 08:37:42 2004 Subject: [missing-sync-palmos-talk] Message-ID: Ok It has now been more then 24 hours since I downloaded the app. 1st I could not get the reg# to work.... Now fixed 2nd the program starts then stops immediately, I saw the fix the gentleman put on the lists but that does not work. 3rd ???????? It?s Friday and I?m worried that this will not be resolved until next week and I can?t sync. Should I reload version 2 until this is fixed? From brian_hall at markspace.com Fri Jul 30 10:19:33 2004 From: brian_hall at markspace.com (Brian Hall) Date: Fri Jul 30 09:20:53 2004 Subject: [missing-sync-palmos-talk] In-Reply-To: <7F9B9816-E1D6-11D8-9D80-003065B82D04@att.net> References: <7F9B9816-E1D6-11D8-9D80-003065B82D04@att.net> Message-ID: >Now, every time I launch MS 4.0 the conduit dialog displays for 1 >second and then immediately quits. I have not been able to perform >even one single hotsync - not even to install the MissingSync .prc Did you try the "editing the plist" trick that was mentioned previously on this list (see archives if you missed it)? Brian -- _____________________________________________________________________ Mark/Space, Inc. voice 408-293-7299 540 N. Santa Cruz Ave. #300 fax 408-293-7298 Los Gatos, CA 95030 From brian_hall at markspace.com Fri Jul 30 10:20:12 2004 From: brian_hall at markspace.com (Brian Hall) Date: Fri Jul 30 09:20:54 2004 Subject: [missing-sync-palmos-talk] 2.0 -> 4 upg In-Reply-To: References: <9DCBDB00-E187-11D8-9BD3-000A95E813BA@pobox.com> <5CBEEA1C-E18C-11D8-9BD3-000A95E813BA@pobox.com> Message-ID: >Is there a date to correct this? Now I can't sync with Palm Desktop... >need to reinstall it... :( Try it again, I think the changes were made yesterday about 3-4 hours after you posted this. Brian -- _____________________________________________________________________ Mark/Space, Inc. voice 408-293-7299 540 N. Santa Cruz Ave. #300 fax 408-293-7298 Los Gatos, CA 95030 From cards1 at tampabay.rr.com Fri Jul 30 13:22:34 2004 From: cards1 at tampabay.rr.com (Steve Adkins) Date: Fri Jul 30 09:22:56 2004 Subject: [missing-sync-palmos-talk] In-Reply-To: References: Message-ID: Peter, How did you get the reg# fixed? I am still waiting from support for this.... Steve On Jul 30, 2004, at 11:37 AM, Peter Rafferty wrote: > Ok It has now been more then 24 hours since I downloaded the app. > 1st I could not get the reg# to work.... Now fixed > 2nd the program starts then stops immediately, I saw the fix the > gentleman > put on the lists but that does not work. > 3rd ???????? > It?s Friday and I?m worried that this will not be resolved until next > week > and I can?t sync. > Should I reload version 2 until this is fixed? > > > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > Unsubcribing information, subscription options and list archives can > be found at: > http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk > From lists at mostrom.pp.se Fri Jul 30 21:28:29 2004 From: lists at mostrom.pp.se (Jan Erik =?iso-8859-1?Q?Mostr=F6m?=) Date: Fri Jul 30 11:28:34 2004 Subject: [missing-sync-palmos-talk] Group Organizer conduit Message-ID: I've just installed Missing Sync and finally got it to run (some problems with registration number and the quit-on-launch problem) but now I've discovered that something doesn't work with the conduit for Group Organizer. Has anyone used this conduit with Missing Sync, how did it work? jem -- Jan Erik Mostr?m www.mostrom.pp.se From luke at shrimper.org.uk Fri Jul 30 20:32:07 2004 From: luke at shrimper.org.uk (Luke Bosman) Date: Fri Jul 30 11:32:15 2004 Subject: [missing-sync-palmos-talk] In-Reply-To: References: Message-ID: On 30 Jul 2004, at 17:22, Steve Adkins wrote: > Peter, > > How did you get the reg# fixed? I am still waiting from support for > this.... Go to http://www.markspace.com/resend-codes.php and enter your details. The updated code should be sent to you automatically within moments. Luke From kfreeman at markspace.com Fri Jul 30 14:35:19 2004 From: kfreeman at markspace.com (Ken Freeman) Date: Fri Jul 30 13:35:24 2004 Subject: [missing-sync-palmos-talk] In-Reply-To: References: Message-ID: Update on Registration Problems You may have encountered a few problems trying to register the Missing Sync. We apologize for the inconvenience, but have resolved the problems and offer the following steps. 1) Invalid Registration Code Error If you are getting an "Invalid Registration Code" error when trying to register The Missing Sync please visit www.markspace.com/resend-codes.php and request a new email with a new reg code. A valid reg code will be a 13 digit number formatted like "314-XXXXX-XXXXX." 2) Missing Sync Quits on Launch If after registering the software and quitting Missing Sync you are unable to launch it again follow these steps: 1. Delete the file com.markspace.missingsync.palmos.plist found in the user's Library/Preferences folder. 2. Enter the registration code you received via email (The format should be like "314-XXXXX-XXXXX.") 3. Continue with the registration process. Now Missing Sync should be ready to go! Ken On Jul 30, 2004, at 8:37 AM, Peter Rafferty wrote: > Ok It has now been more then 24 hours since I downloaded the app. > 1st I could not get the reg# to work.... Now fixed > 2nd the program starts then stops immediately, I saw the fix the > gentleman > put on the lists but that does not work. > 3rd ???????? > It?s Friday and I?m worried that this will not be resolved until next > week > and I can?t sync. > Should I reload version 2 until this is fixed? > > > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > Unsubcribing information, subscription options and list archives can > be found at: > http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk > From dstewart at iol.ie Fri Jul 30 23:33:52 2004 From: dstewart at iol.ie (David Stewart) Date: Fri Jul 30 14:39:17 2004 Subject: [missing-sync-palmos-talk] Problem with Missing Sync 4.0 Message-ID: <26DBF1F8-E270-11D8-ADA4-000A277DCFAE@iol.ie> I reported the following to Mark Space tech support this evening but it appears I may have to wait one or two working days for a reply. In the meantime, has anyone else had a problem similar to this. I installed Missing Sync 4.0 this afternoon (after paying $40 and downloading it). The installation went without a hitch until the first synchronisation with my Tungsten T2. My Palm chimed to indicate that the synchronisation has finished successfully but the display on my screen indicated that synchronisation of one file was still in progress. AFter 20 minutes of nothing happening, I clicked on cancel. Nothing happened. After another 20 minutes I forced a quit from Missing Sync. However, all attempts to run it again have failed. When I click on the Missing Sync icon in the dock, the conduit list flashes on the screen and the application quits. Pushing the Hotsync button on my cradle is no better. The Missing Sync icon in the Dock bounces one or twice and the app quits while the Handheld tells me the synchronisation has been performed successfully. Interestingly enough, I am able to mound the SD memory card on my desktop. I have uninstalled and reinstalled Missing Sync. I have run Diskwarrior to make sure the hard disk is working properly. All to no avail. Any help would be appreciated. David Stewart ------------------------------------------------------------------------ -------- David Stewart - Macintosh user: Resistance is _not_ futile - Read my Weblog at http://sciencefriction.typepad.com ------------------------------------------------------------------------ -------- From pantone at indy.net Fri Jul 30 17:46:15 2004 From: pantone at indy.net (Chris) Date: Fri Jul 30 14:46:19 2004 Subject: [missing-sync-palmos-talk] In-Reply-To: Message-ID: On 7/30/04 3:35 PM, "Ken Freeman" kinda said this: > 2) Missing Sync Quits on Launch > If after registering the software and quitting Missing Sync you are > unable to launch it again follow these steps: What if it quits before you enter the registration codes? For me the app launches and quits immediately...I merely get a glimpse of the registration screen. regards chris From mmurray at maths.adelaide.edu.au Sat Jul 31 08:16:42 2004 From: mmurray at maths.adelaide.edu.au (Michael Murray) Date: Fri Jul 30 14:46:49 2004 Subject: [missing-sync-palmos-talk] Problem with Missing Sync 4.0 In-Reply-To: <26DBF1F8-E270-11D8-ADA4-000A277DCFAE@iol.ie> References: <26DBF1F8-E270-11D8-ADA4-000A277DCFAE@iol.ie> Message-ID: Hi David The answer is probably this earlier post of mine. Regards - Michael -------------------------------------------- Open ~/Library/Preferences/com.markspace.missingsync.palmos.plist in a text editor and look for a line like Registration Code 1234567890 (Serial Number: Error, please contact s where the numbers are different. If you find a line like this replace it by Registration Code 1234567890 and save. In my case this enabled me to launch the app again and sync. I have reported this to Mark/Space Support. Michael -- -- .......................................................... Michael Murray Professor of Pure Mathematics Head of School School of Mathematical Sciences Fax: 61+ 8 8303 3696 University of Adelaide Phone: 61+ 8 8303 4174 Australia 5005 Email: mmurray@maths.adelaide.edu.au Web: http://www.maths.adelaide.edu.au/~mmurray CRICOS Provider Number 00123M This email message is intended only for the addressee(s) and contains information that may be confidential and/or copyright. If you are not the intended recipient please notify the sender by reply email and immediately delete this email. Use, disclosure or reproduction of this email by anyone other than the intended recipient(s) is strictly prohibited. No representation is made that this email or any attachments are free of viruses. Virus scanning is recommended and is the responsibility of the recipient. .......................................................... From kfreeman at markspace.com Fri Jul 30 16:02:44 2004 From: kfreeman at markspace.com (Ken Freeman) Date: Fri Jul 30 15:02:49 2004 Subject: [missing-sync-palmos-talk] Problem with Missing Sync 4.0 In-Reply-To: <26DBF1F8-E270-11D8-ADA4-000A277DCFAE@iol.ie> References: <26DBF1F8-E270-11D8-ADA4-000A277DCFAE@iol.ie> Message-ID: <2F32E798-E274-11D8-A1DB-000A9570181E@markspace.com> You need the steps in the second problem described below. We apologize if you have encountered a few problems during the registration process for the Missing Sync for Palm OS 4.0. The problem was NOT with the software, but rather on our registration server back-end. We have resolved the problems on our end and offer the following steps for you to resolve the problems. 1) Invalid Registration Code Error If you are getting an "Invalid Registration Code" error when trying to register The Missing Sync please visit www.markspace.com/resend-codes.php and request a new email with a new reg code. A valid reg code will be a 13 digit number formatted like this "314-XXXXX-XXXXX." 2) Missing Sync Quits on Launch If after registering the software and quitting Missing Sync you are unable to launch it again follow these steps: 1. Delete the file com.markspace.missingsync.palmos.plist found in the user's Library/Preferences folder. 2. Launch The Missing Sync for Palm OS application 3. Enter the registration code you received via email (The format should be like "314-XXXXX-XXXXX.") 4. Continue with the registration process. Now Missing Sync should be ready to go! Enjoy! The Mark/Space Support Team www.markspace.com/support Ken On Jul 30, 2004, at 2:33 PM, David Stewart wrote: > I reported the following to Mark Space tech support this evening but > it appears I may have to wait one or two working days for a reply. In > the meantime, has anyone else had a problem similar to this. > > I installed Missing Sync 4.0 this afternoon (after paying $40 and > downloading it). The installation went without a hitch until the first > synchronisation with my Tungsten T2. My Palm chimed to indicate that > the synchronisation has finished successfully but the display on my > screen indicated that synchronisation of one file was still in > progress. AFter 20 minutes of nothing happening, I clicked on cancel. > Nothing happened. After another 20 minutes I forced a quit from > Missing Sync. However, all attempts to run it again have failed. When > I click on the Missing Sync icon in the dock, the conduit list flashes > on the screen and the application quits. Pushing the Hotsync button on > my cradle is no better. The Missing Sync icon in the Dock bounces one > or twice and the app quits while the Handheld tells me the > synchronisation has been performed successfully. Interestingly enough, > I am able to mound the SD memory card on my desktop. > > I have uninstalled and reinstalled Missing Sync. I have run > Diskwarrior to make sure the hard disk is working properly. All to no > avail. > > Any help would be appreciated. > > David Stewart > ----------------------------------------------------------------------- > --------- > David Stewart - Macintosh user: Resistance is _not_ futile - Read my > Weblog at http://sciencefriction.typepad.com > > ----------------------------------------------------------------------- > --------- > > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > Unsubcribing information, subscription options and list archives can > be found at: > http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk > From kfreeman at markspace.com Fri Jul 30 16:04:21 2004 From: kfreeman at markspace.com (Ken Freeman) Date: Fri Jul 30 15:04:24 2004 Subject: [missing-sync-palmos-talk] In-Reply-To: References: Message-ID: <68F7A956-E274-11D8-A1DB-000A9570181E@markspace.com> On Jul 30, 2004, at 2:46 PM, Chris wrote: > On 7/30/04 3:35 PM, "Ken Freeman" kinda said this: > >> 2) Missing Sync Quits on Launch >> If after registering the software and quitting Missing Sync you are >> unable to launch it again follow these steps: > > What if it quits before you enter the registration codes? For me the > app > launches and quits immediately...I merely get a glimpse of the > registration > screen. Try these steps: 1. Delete the file com.markspace.missingsync.palmos.plist found in the user's Library/Preferences folder. 2. Launch The Missing Sync for Palm OS application 3. Enter the registration code you received via email (The format should be like "314-XXXXX-XXXXX.") 4. Continue with the registration process. Ken > > regards > chris > > > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > Unsubcribing information, subscription options and list archives can > be found at: > http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk > From pantone at indy.net Fri Jul 30 18:49:39 2004 From: pantone at indy.net (Chris) Date: Fri Jul 30 15:49:42 2004 Subject: [missing-sync-palmos-talk] In-Reply-To: <68F7A956-E274-11D8-A1DB-000A9570181E@markspace.com> Message-ID: On 7/30/04 5:04 PM, "Ken Freeman" kinda said this: > Try these steps: > 1. Delete the file com.markspace.missingsync.palmos.plist found in the > user's Library/Preferences folder. > 2. Launch The Missing Sync for Palm OS application > 3. Enter the registration code you received via email (The format > should be like "314-XXXXX-XXXXX.") > 4. Continue with the registration process. I can do step one. But that's it. When I launch Missing Sync the application quits immediately, before I'm able to enter any registration information. I did manage to get a screen grab of the screen that comes up and noticed it copies the ethernet NIC address. regards chris From dbutenhof at mac.com Fri Jul 30 20:01:48 2004 From: dbutenhof at mac.com (Dave Butenhof) Date: Fri Jul 30 16:01:54 2004 Subject: [missing-sync-palmos-talk] Re: Group Organizer conduit In-Reply-To: <200407301944.i6UJiL3x025440@penguin.markspace.com> References: <200407301944.i6UJiL3x025440@penguin.markspace.com> Message-ID: <6F9B2189-E27C-11D8-86CB-00039387347E@mac.com> On Jul 30, 2004, at 15:44, missing-sync-palmos-talk-request@lists.markspace.com wrote: > From: Jan Erik Mostr?m > Date: July 30, 2004 14:28:29 EDT > To: missing-sync-palmos-talk@lists.markspace.com > Subject: [missing-sync-palmos-talk] Group Organizer conduit > Reply-To: "The Missing Sync (Mac/Palm OS) Discussion List" > > > I've just installed Missing Sync and finally got it to run (some > problems > with registration number and the quit-on-launch problem) but now I've > discovered that something doesn't work with the conduit for Group > Organizer. > Has anyone used this conduit with Missing Sync, how did it work? After I finally got the bloody thing to even RUN, I tried to sync with Group Organizer. (Oddly, while I was repeatedly running into the "won't launch a second time" bug yesterday, and was anxious to try the workaround today when I got home from work, I tried running it first and found that for some reason it's no longer having that problem, without me doing anything.) Anyway, OrganizerConduit repeatedly HANGS -- both the Palm and Missing Sync. I have to reset the former and force-quit the latter to break them loose. (The cancel buttons in the dialog don't work.) The Palm's sync dialog indicates it doesn't realize that the Organizer sync has even started... in my normal conduit set it still thinks it's doing "Voice Memo", and with only OrganizerConduit enabled the Palm thinks it's still initializing the sync. I sent in a tech support email a few hours ago, but probably won't get a reply until at least Monday. Now I feel pretty bad. I thought about Missing Sync for quite a while, but it never quite seemed worth paying money for a "better version" of what was free. But I've been having repeated weird problems with Palm sync; and with the grand release of MS 4.0 I decided to give it a try. I did check the conduit compatibility list; and while Group Organizer wasn't on it, Personal Organizer was... and GO wasn't on the "not supported list", so it seemed like a reasonable gamble. I guess that's one bet I lost, to the tune of $40. I hope they do something about this one quickly. From lists at mostrom.pp.se Sat Jul 31 02:17:17 2004 From: lists at mostrom.pp.se (Jan Erik =?iso-8859-1?Q?Mostr=F6m?=) Date: Fri Jul 30 16:17:22 2004 Subject: [missing-sync-palmos-talk] Re: Group Organizer conduit In-Reply-To: <6F9B2189-E27C-11D8-86CB-00039387347E@mac.com> Message-ID: On 2004-07-30 01:01, Dave Butenhof wrote: > Anyway, OrganizerConduit repeatedly HANGS -- both the Palm and Missing > Sync. I have to reset the former and force-quit the latter to break > them loose. (The cancel buttons in the dialog don't work.) The Palm's > sync dialog indicates it doesn't realize that the Organizer sync has > even started... in my normal conduit set it still thinks it's doing > "Voice Memo", and with only OrganizerConduit enabled the Palm thinks > it's still initializing the sync. I sent in a tech support email a few > hours ago, but probably won't get a reply until at least Monday. > > Now I feel pretty bad. I thought about Missing Sync for quite a while, > but it never quite seemed worth paying money for a "better version" of > what was free. But I've been having repeated weird problems with Palm > sync; and with the grand release of MS 4.0 I decided to give it a try. > I did check the conduit compatibility list; and while Group Organizer > wasn't on it, Personal Organizer was... and GO wasn't on the "not > supported list", so it seemed like a reasonable gamble. I guess that's > one bet I lost, to the tune of $40. > > I hope they do something about this one > quickly. I'm not as pessimistic, Missing Sync looks fine (I was mainly suprised that the rest of my conduits worked). In my case the Palm says that it's syncing the Note pad while Missing Sync says that it's syncing the Organizer. jem -- Jan Erik Mostr?m www.mostrom.pp.se From martin_p at euronet.nl Sat Jul 31 02:37:34 2004 From: martin_p at euronet.nl (martin pyper) Date: Fri Jul 30 16:37:37 2004 Subject: [missing-sync-palmos-talk] FM sync for Jfile conduit Message-ID: I installed the new missing sync today and after solving the registration issue I managed to sync several times except the Jfile conduit FM sync now no longer works anyone else haver this problem? it says that I need to run it from Hotsync (which no longer runs of course) I use FMsync regularly and really hope there's a solution regards martin -- "Computer games don't affect kids; I mean if Pac-Man affected us as kids, we'd all be running around in darkened rooms, munching magic pills and listening to repetitive electronic music." -Kristian Wilson, Nintendo, 1989 From dstewart at iol.ie Sat Jul 31 01:44:13 2004 From: dstewart at iol.ie (David Stewart) Date: Fri Jul 30 17:07:39 2004 Subject: [missing-sync-palmos-talk] Problem with Missing Sync 4.0 In-Reply-To: References: <26DBF1F8-E270-11D8-ADA4-000A277DCFAE@iol.ie> Message-ID: <5CAC97CE-E282-11D8-9259-000A277DCFAE@iol.ie> Thanks to everyone who replied. I now have it synchronising away. Thanks. David On 30 Jul 2004, at 22:46, Michael Murray wrote: > Hi David > > The answer is probably this earlier post of mine. > > Regards - Michael > > > -------------------------------------------- > > Open > > ~/Library/Preferences/com.markspace.missingsync.palmos.plist > > in a text editor and look for a line like > > Registration Code > 1234567890 (Serial Number: Error, please contact s > > where the numbers are different. If you find a line like this replace > it by > > Registration Code > 1234567890 > > > and save. In my case this enabled me to launch the app again and sync. > > I have reported this to Mark/Space Support. > > > Michael > -- > -- > .......................................................... > Michael Murray > > Professor of Pure Mathematics > Head of School > School of Mathematical Sciences Fax: 61+ 8 8303 3696 > University of Adelaide Phone: 61+ 8 8303 4174 > Australia 5005 Email: mmurray@maths.adelaide.edu.au > Web: http://www.maths.adelaide.edu.au/~mmurray > > CRICOS Provider Number 00123M > > This email message is intended only for the addressee(s) > and contains information that may be confidential and/or > copyright. If you are not the intended recipient please > notify the sender by reply email and immediately delete > this email. Use, disclosure or reproduction of this email > by anyone other than the intended recipient(s) is strictly > prohibited. No representation is made that this email or > any attachments are free of viruses. Virus scanning is > recommended and is the responsibility of the recipient. > .......................................................... > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > Unsubcribing information, subscription options and list archives can > be found at: > http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk > > > ------------------------------------------------------------------------ -------- David Stewart - Macintosh user: Resistance is _not_ futile - Read my Weblog at http://sciencefriction.typepad.com ------------------------------------------------------------------------ -------- From sgruby at markspace.com Fri Jul 30 18:12:46 2004 From: sgruby at markspace.com (Scott Gruby) Date: Fri Jul 30 17:12:52 2004 Subject: [missing-sync-palmos-talk] FM sync for Jfile conduit In-Reply-To: References: Message-ID: <59C6BF54-E286-11D8-BA73-000D932F4F94@markspace.com> On Jul 30, 2004, at 4:37 PM, martin pyper wrote: > > I installed the new missing sync today and after > solving the registration issue I managed to sync several times > except the Jfile conduit FM sync now no longer works > anyone else haver this problem? > > it says that I need to run it from Hotsync > (which no longer runs of course) > > I use FMsync regularly and really hope there's a solution > > r This is a bug in FMSync. Someone needs to remove that one line of code in FMSync and recompile. I have no idea why they put it in, but FMSync needs to fix that issue. Since it is open source, someone just has to comment out the line that checks for heap or stack size. -- Scott Gruby Lead Engineer Mark/Space, Inc. From jason at ophiochos.org.uk Sat Jul 31 02:25:36 2004 From: jason at ophiochos.org.uk (Jason Davies) Date: Fri Jul 30 17:22:18 2004 Subject: [missing-sync-palmos-talk] FM sync for Jfile conduit In-Reply-To: Message-ID: >I use FMsync regularly and really hope there's a solution really? do you have an old palm or has FMSync been updated recently? I miss it badly...! From sgruby at markspace.com Fri Jul 30 18:51:43 2004 From: sgruby at markspace.com (Scott Gruby) Date: Fri Jul 30 17:51:49 2004 Subject: [missing-sync-palmos-talk] FM sync for Jfile conduit In-Reply-To: References: Message-ID: On Jul 30, 2004, at 5:25 PM, Jason Davies wrote: >> I use FMsync regularly and really hope there's a solution > > > really? do you have an old palm or has FMSync been updated recently? I > miss it badly...! > > The OS X version was posted July 2003: . However, in order for it to work with Missing Sync, it must be fixed and recompiled. -- Scott Gruby Lead Engineer Mark/Space, Inc. From brian_hall at markspace.com Fri Jul 30 19:18:19 2004 From: brian_hall at markspace.com (Brian Hall) Date: Fri Jul 30 18:18:17 2004 Subject: [missing-sync-palmos-talk] FM sync for Jfile conduit In-Reply-To: References: Message-ID: >On Jul 30, 2004, at 5:25 PM, Jason Davies wrote: > >>> I use FMsync regularly and really hope there's a solution >> >> >> really? do you have an old palm or has FMSync been updated recently? I >> miss it badly...! >> >> > >The OS X version was posted July 2003: >. However, in order for it to >work with Missing Sync, it must be fixed and recompiled. FWIW, I sent an email to the author (Rob Tsuk) at his sourceforge address. We'll see if he replies. I actually worked with him in the early 90s at ExperVision, but haven't seen him in years. Small world. Brian -- _____________________________________________________________________ Mark/Space, Inc. voice 408-293-7299 540 N. Santa Cruz Ave. #300 fax 408-293-7298 Los Gatos, CA 95030 From rmaehl at bigpond.net.au Sat Jul 31 12:37:26 2004 From: rmaehl at bigpond.net.au (Russ Maehl) Date: Fri Jul 30 18:37:32 2004 Subject: [missing-sync-palmos-talk] Problem with Missing Sync 4.0 In-Reply-To: <5CAC97CE-E282-11D8-9259-000A277DCFAE@iol.ie> Message-ID: I have to say that this all looks very beta to me and ready for prime time. This is one of the most expensive pieces of software for the palm and you really would expect better then this. Here is how it is going for me: I got around the problem of Missing Sync quitting on me by editing the preference file as suggested. I did a reinstall of the software. I noticed that the install did not prepare Missing Sync.prc to install as the manual suggested. I cannot cannot install anything nothing will stick when dragged to the application. No window exists allowing me to install on SD card. No check box or reference to 'Network' in the Handhelds . 'Settings' does nothing. Even if the sync worked I cannot control what kind of actions are needed for each conduit. Anyway after making the edit and reinstalled I managed to get the sync process to start but the sync failed with "Sync Error....The conduit manager has unexpectedly quit" The sync log is useless...nothing in there at all. Good news is that I got the internet sharing to work and installed the Missing Sync.prc (had to use other methods) and it works....seems a little slower to mount...but works. Russ From mmurray at maths.adelaide.edu.au Sat Jul 31 15:32:48 2004 From: mmurray at maths.adelaide.edu.au (Michael Murray) Date: Fri Jul 30 22:02:55 2004 Subject: [missing-sync-palmos-talk] Problem with Missing Sync 4.0 In-Reply-To: References: Message-ID: > >I cannot cannot install anything nothing will stick when dragged to the >application. I can drag things onto the Install window and they get put in the list of things to install. >No window exists allowing me to install on SD card. Have you done a sync ? I wonder if it needs to see you have an SD card in? > >No check box or reference to 'Network' in the Handhelds . > >'Settings' does nothing. Even if the sync worked I cannot control what kind >of actions are needed for each conduit. That works for me. > >Anyway after making the edit and reinstalled I managed to get the sync >process to start but the sync failed with "Sync Error....The conduit manager >has unexpectedly quit" > >The sync log is useless...nothing in there at all. I would be tempted to make a clean User in the Users in System Preferences and try everything thing out logged in as that user. You might want to run the deinstaller first and do it all again. I know its not a long term solution but if it works there you know its probably a clash with some pref or something else you have. Maybe also try Repairing Permissions ??? Michael -- .......................................................... Michael Murray Professor of Pure Mathematics Head of School School of Mathematical Sciences Fax: 61+ 8 8303 3696 University of Adelaide Phone: 61+ 8 8303 4174 Australia 5005 Email: mmurray@maths.adelaide.edu.au Web: http://www.maths.adelaide.edu.au/~mmurray CRICOS Provider Number 00123M This email message is intended only for the addressee(s) and contains information that may be confidential and/or copyright. If you are not the intended recipient please notify the sender by reply email and immediately delete this email. Use, disclosure or reproduction of this email by anyone other than the intended recipient(s) is strictly prohibited. No representation is made that this email or any attachments are free of viruses. Virus scanning is recommended and is the responsibility of the recipient. .......................................................... From daze at mac.com Sat Jul 31 09:39:11 2004 From: daze at mac.com (Darius Zendeh) Date: Fri Jul 30 23:39:18 2004 Subject: [missing-sync-palmos-talk] still problems with the registration Message-ID: <54E8382A-E2BC-11D8-8399-003065A2112E@mac.com> I requested the registration code three times, each time I get the same code, so nothing has changed. I removed the com.markspace.missingsync.palmos.plist but this seems to have nothing to do with the registration, because it still doesn't work. What I am curious about is the registration window: there is my Computer Name (why?), the Registration Code (here goes the reg# 314-XXXXX-XXXXX), First Name, Last Name (where is the Hotsync Name?), and the weirdes of all to me: the Email Address, which shows a default emial-address wich differs from my email-address which I used to register The Missing Sync (funny: I am not able to type the email-add @ maybe because of the german keyboard layout?). But regardless of which email-address I use, I get the message: "Registration code is invalid". If I choose not to connect to the internet I get the following message: "In order to register Missing Sync, please visit: http://www.markspace.com/register/ and provide the following information: Your name Your email address Your registration code Ethernet Address - 00:XX:XX:XX:XX:XX" If I go to the above internet address, I only can register for the Missing Sync for Pocket PC. If I go to http://www.markspace.com/register/handle-serial.php and type in my new reg-code, I'll get a download link for SplashPhoto and following message: "Registration code: Error, please contact support@markspace.com" (which I have done already, but no answer so far). I am clueless :) Darius. From rmaehl at bigpond.net.au Sat Jul 31 18:53:38 2004 From: rmaehl at bigpond.net.au (Russ Maehl) Date: Sat Jul 31 00:53:47 2004 Subject: [missing-sync-palmos-talk] Problem with Missing Sync 4.0 In-Reply-To: Message-ID: I fall upon my own petard......my sync problems are cured. This was the problem: I have a folder in my documents folder called "Palm" as expected, but it is an alias to a folder on my portable drive. I do this in order to make sure that I don't duplicate data between home and office. This is done with Entourage as well as itunes and the iPhoto library. Has always worked fine until now...... It looks as if Missing Sync cannot see the alias and that is why the software was misbehaving. I have eliminated the 'Palm' alias and my the sync is working great...although I will miss not having the setup I had. Still unsure of why I don't see any reference to 'Network' in the Handhelds window, and why my SD card is not seen for installs? Hope this helps others. Russ On 31/7/04 11:37 AM, "Russ Maehl" wrote: > I have to say that this all looks very beta to me and ready for prime time. > This is one of the most expensive pieces of software for the palm and you > really would expect better then this. > > Here is how it is going for me: > > I got around the problem of Missing Sync quitting on me by editing the > preference file as suggested. > > I did a reinstall of the software. I noticed that the install did not > prepare Missing Sync.prc to install as the manual suggested. > > I cannot cannot install anything nothing will stick when dragged to the > application. > > No window exists allowing me to install on SD card. > > No check box or reference to 'Network' in the Handhelds . > > 'Settings' does nothing. Even if the sync worked I cannot control what kind > of actions are needed for each conduit. > > Anyway after making the edit and reinstalled I managed to get the sync > process to start but the sync failed with "Sync Error....The conduit manager > has unexpectedly quit" > > The sync log is useless...nothing in there at all. > > Good news is that I got the internet sharing to work and installed the > Missing Sync.prc (had to use other methods) and it works....seems a little > slower to mount...but works. > > Russ > > > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > Unsubcribing information, subscription options and list archives can be found > at: > http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk From pekka.nikander at iki.fi Sat Jul 31 12:10:00 2004 From: pekka.nikander at iki.fi (Pekka Nikander) Date: Sat Jul 31 01:10:03 2004 Subject: [missing-sync-palmos-talk] MS 4.0: Problems with WLAN and USB syncing; BT syncing not working at all Message-ID: <04E01CF7-E2C9-11D8-BC79-000393CE1E8C@iki.fi> I purchased and installed MS 4.0 yesterday, and I have serious problems with WLAN and USB, BT syncing working not at all. (I also had the initial registration and plist problem, but that was fixed as M/S fixed their backend server...) First, there seems to be some glitch in the Missing Sync Monitor that sometimes makes it completely unresponsive. None of the syncing options works. I am not sure what reset this, but starting and quitting the GUI app, Missing Sync for Palm OS, seems to fix this. I've also at least twice got an Conduit Manager crash; I can send the core dump if anyone is interested. (I think that both times I initially didn't have the GUI app running when this happened, but I may be wrong.) Secondly, I seem to get non-deterministic results on syncing working wrt. the GUI app running. This is more gut feeling that a result of proper testing, but I have the feeling that sometimes syncing works when the GUI app is running (but not when it is not), and sometimes vice versa. It may be related to whether I use WLAN or USB. Alternatively, this may just be a symptom of the problem above, the Monitor going into an unresponsive mode. WLAN and BT are definitely more problematic than USB, even though I do have had problems with USB syncing as well. (See the first problem above). In the beginning, I didn't have any success whatsoever with neither WLAN or BT syncing, even though I very carefully followed the steps in the manual and help. In the WLAN case, it turned out that the Mac OS X firewall was part of the problem. You have to manually open TCP port 14238 for the WLAN syncing to work. To do that, go to System Preferences->Sharing, Firewall tab. Click New... Set Port name to Other, Port NUmber to 14238, and description to e.g. Palm LAN HotSync. After that, and after having had my Mac sleeping overnight, I was able to perform WLAN hotsync for a number of times (three or four), but after that it stopped working again. The TCP connection is created (I can verify this with tcpdump and netstat -an) but syncing doesn't start. With netstat -an there seems to be some stale TCP connections. Perhaps the Monitor doesn't properly realise that the Palm has closed the TCP connection, and gets confused? In the BT case, so far I've had no success. When I try to initiate BT sync from the Palm, the BT Icon on the Menu bar does show BT connection, but synching doesn't start at all. With BT Serial Utility I've verified that there still is the Bluetooth-PDA-Sync port just like there was before. With Missing Sync for Sony Clie BT sync worked just fine. --Pekka Nikander From hflaxman at neb.rr.com Sat Jul 31 04:23:47 2004 From: hflaxman at neb.rr.com (Harry Flaxman) Date: Sat Jul 31 01:28:12 2004 Subject: [missing-sync-palmos-talk] Which Palm Destop for PEG-TJ37 In-Reply-To: <200407310756.i6V7uL40019171@penguin.markspace.com> References: <200407310756.i6V7uL40019171@penguin.markspace.com> Message-ID: <410B5713.1020303@neb.rr.com> Which Palm Deskop version should I use for the above handheld. It should have said Sony PEG-TJ37? I have had no luck in syncrhonizing with the desktop I took down and am wondering if this is what's causing it? Regards, Harry From edward.goebbel at uni-tuebingen.de Sat Jul 31 11:28:41 2004 From: edward.goebbel at uni-tuebingen.de (Edward Goebbel) Date: Sat Jul 31 01:29:42 2004 Subject: [missing-sync-palmos-talk] can't load TungstenC SD card Message-ID: Hi, I have seen a similar message with a Treo on this list. I can't mount the SD card on my Tungsten C with Missing Sync 4 (version 2 worked fine for me). It worked once, then never again. Disk Utility recognises the card as unmounted, but cannot mount it either. I have performed all possible preventive measures, to no avail. Any idea what I should do? Other strange things that happened during installation, besides the quit after registration, were: - interference with with my Logitech mouse - installation deactivated my root account (have never seen this before, although being a long-time Mac User; current system iMac Flat Panel OSX 10.3.4) Edward From bmad1 at gmx.net Sat Jul 31 12:52:55 2004 From: bmad1 at gmx.net (bmad1) Date: Sat Jul 31 02:53:01 2004 Subject: [missing-sync-palmos-talk] Missing Sync 4.0 Sync with WLAN Message-ID: Hi Everybody, I bought this new Version of Missing Sync, because I would like to sync wireless using WLAN. I entered everything like shown in the help File. But nothing happens. Why does it not work? I got a Netgear 624 DSL-Router installed. Franc From martin_p at euronet.nl Sat Jul 31 13:16:10 2004 From: martin_p at euronet.nl (martin pyper) Date: Sat Jul 31 03:16:14 2004 Subject: [missing-sync-palmos-talk] FM sync for Jfile conduit In-Reply-To: Message-ID: >> On Jul 30, 2004, at 5:25 PM, Jason Davies wrote: >> >>>> I use FMsync regularly and really hope there's a solution >>> >>> >>> really? do you have an old palm or has FMSync been updated recently? I >>> miss it badly...! >>> >>> >> >> The OS X version was posted July 2003: >> . However, in order for it to >> work with Missing Sync, it must be fixed and recompiled. > > FWIW, I sent an email to the author (Rob Tsuk) at his sourceforge address. > We'll see if he replies. I actually worked with him in the early 90s at > ExperVision, but haven't seen him in years. Small world. > > Brian that's great news, my fingers are well and truly crossed thanks for the replies everyone... incidentally I have since discovered that the Qsync conduit for Entourage also crashes martin From jo at jomiller.com Sat Jul 31 08:49:52 2004 From: jo at jomiller.com (Jo Miller) Date: Sat Jul 31 04:50:16 2004 Subject: [missing-sync-palmos-talk] Anyone get Vindigo conduit to work? Message-ID: Has anyone managed to sync Vindigo on MissingSync v4? It fails every time for me. And http://www.markspace.com/palmos_conduits.htm, which is supposed to be a list of supported conduits, merely redirects to the Mark/Space homepage. Jo From mmurray at maths.adelaide.edu.au Sat Jul 31 22:23:21 2004 From: mmurray at maths.adelaide.edu.au (Michael Murray) Date: Sat Jul 31 04:53:28 2004 Subject: [missing-sync-palmos-talk] Anyone get Vindigo conduit to work? In-Reply-To: References: Message-ID: >Has anyone managed to sync Vindigo on MissingSync v4? It fails every >time for me. And http://www.markspace.com/palmos_conduits.htm, which >is supposed to be a list of supported conduits, merely redirects to >the Mark/Space homepage. > > >Jo >_______________________________________________ Try http://www.markspace.com/missingsync_palmos_conduits.html Vindigo is listed as not supported. Michael -- .......................................................... Michael Murray Professor of Pure Mathematics Head of School School of Mathematical Sciences Fax: 61+ 8 8303 3696 University of Adelaide Phone: 61+ 8 8303 4174 Australia 5005 Email: mmurray@maths.adelaide.edu.au Web: http://www.maths.adelaide.edu.au/~mmurray CRICOS Provider Number 00123M This email message is intended only for the addressee(s) and contains information that may be confidential and/or copyright. If you are not the intended recipient please notify the sender by reply email and immediately delete this email. Use, disclosure or reproduction of this email by anyone other than the intended recipient(s) is strictly prohibited. No representation is made that this email or any attachments are free of viruses. Virus scanning is recommended and is the responsibility of the recipient. .......................................................... From jo at jomiller.com Sat Jul 31 09:02:14 2004 From: jo at jomiller.com (Jo Miller) Date: Sat Jul 31 05:02:25 2004 Subject: [missing-sync-palmos-talk] Anyone get Vindigo conduit to work? Message-ID: >Has anyone managed to sync Vindigo on MissingSync v4? It fails every >time for me. And http://www.markspace.com/palmos_conduits.htm, which >is supposed to be a list of supported conduits, merely redirects to >the Mark/Space homepage. > > >Jo >_______________________________________________ >Try >http://www.markspace.com/missingsync_palmos_conduits.html >Vindigo is listed as not supported. >Michael Thanks for the correct URL. (M/S gives the wrong one in documentation and knowledgebase.) What can we do while waiting for conduit support? I don't want to go back to HotSync. thanks, jo From sgruby at markspace.com Sat Jul 31 07:54:01 2004 From: sgruby at markspace.com (Scott Gruby) Date: Sat Jul 31 06:54:10 2004 Subject: [missing-sync-palmos-talk] Problem with Missing Sync 4.0 In-Reply-To: References: Message-ID: <13F3DFD5-E2F9-11D8-BA73-000D932F4F94@markspace.com> On Jul 31, 2004, at 12:53 AM, Russ Maehl wrote: > I have a folder in my documents folder called "Palm" as expected, but > it is > an alias to a folder on my portable drive. I do this in order to make > sure > that I don't duplicate data between home and office. This is done with > Entourage as well as itunes and the iPhoto library. Has always worked > fine > until now...... > We will look at fixing this for a future release. > >> No check box or reference to 'Network' in the Handhelds . >> >> This only shows up if you check Network Connection in preferences. -- Scott Gruby Lead Engineer Mark/Space, Inc. From pekka.nikander at iki.fi Sat Jul 31 19:56:48 2004 From: pekka.nikander at iki.fi (Pekka Nikander) Date: Sat Jul 31 08:56:52 2004 Subject: [missing-sync-palmos-talk] Missing Sync 4.0 Sync with WLAN In-Reply-To: References: Message-ID: <3B00B808-E30A-11D8-B8F4-000393CE1E8C@iki.fi> Franc, > I bought this new Version of Missing Sync, because I would like to sync > wireless using WLAN. I entered everything like shown in the help File. > But > nothing happens. Why does it not work? > I got a Netgear 624 DSL-Router installed. Do you have firewall running on your Mac (System Prefences ->Sharing, Firewall tab)? If so, see my previous posting about problems with WLAN and BT to see how to properly set up the firewall to bypass syncing traffic. If you know how to go to command line, it would also help if you could do % sudo traceroute -ni en1 (supposing that en1 is your WLAN, as usual). That would dump on the terminal the traffic on your LAN. From the output one can see if the TCP connection used for WLAN syncing is created properly. Also, on command line, enter % netstat -an | grep 14238 If you get a line like (but with much more spaces) tcp4 0 0 *.14238 *.* LISTEN then Missing Sync is listening for network traffic properly. While trying to get WLAN working myself, I also noticed that at least my Sony Clie has some problems with IP addresses entered manually, and got better results by making sure that my Mac has a domain name in the DNS, and using the DNS instead of a numeric IP address. (The Clie sometimes sent the address in wrong byte order.) --Pekka Nikander From jzurek at cabrini.edu Sat Jul 31 14:21:08 2004 From: jzurek at cabrini.edu (Jerry Zurek) Date: Sat Jul 31 10:21:18 2004 Subject: [missing-sync-palmos-talk] Time Error in Internet Sharing In-Reply-To: <200407310756.i6V7uL3w019171@penguin.markspace.com> Message-ID: While trying to do an Avantgo sync with MS 4.0, I received the following error: Certificate Error: TLInvalidCertDatesErr Please verify that your handheld device's clock is set correctly. Then Second screen says: Error 5471 I check my PDA's time and zone and my computer's and they are the same. I do recall that when I used "Sync Entourage-iCal" by Paul Berkowicz for the first time yesterday, I had to turn on Time Zone support in the iCal preferences. I was able to sync Avantgo before that but not afterwards. I unchecked Time Zone support but still got the error. I can do Hotsyncs in MS4.0 fine. Any ideas what this error means and how to fix it. -- Thanks, Jerry Zurek From brian_hall at markspace.com Sat Jul 31 12:18:08 2004 From: brian_hall at markspace.com (Brian Hall) Date: Sat Jul 31 11:18:08 2004 Subject: [missing-sync-palmos-talk] MS 4.0: Problems with WLAN and USB syncing; BT syncing not working at all In-Reply-To: <04E01CF7-E2C9-11D8-BC79-000393CE1E8C@iki.fi> References: <04E01CF7-E2C9-11D8-BC79-000393CE1E8C@iki.fi> Message-ID: >With Missing Sync for Sony Clie BT sync worked just fine. If you are using a CLIE with BT, you need to check the "non-compliant handheld" checkbox in prefs. Brian -- _____________________________________________________________________ Mark/Space, Inc. voice 408-293-7299 540 N. Santa Cruz Ave. #300 fax 408-293-7298 Los Gatos, CA 95030 From pekka.nikander at iki.fi Sat Jul 31 22:43:01 2004 From: pekka.nikander at iki.fi (Pekka Nikander) Date: Sat Jul 31 11:43:05 2004 Subject: [missing-sync-palmos-talk] MS 4.0: Problems with WLAN and USB syncing; BT syncing not working at all In-Reply-To: References: <04E01CF7-E2C9-11D8-BC79-000393CE1E8C@iki.fi> Message-ID: <735ACB41-E321-11D8-B8F4-000393CE1E8C@iki.fi> Brian, >> With Missing Sync for Sony Clie BT sync worked just fine. > > If you are using a CLIE with BT, you need to check the "non-compliant > handheld" checkbox in prefs. Thanks, but I've tried that. Several times. Didn't make any difference. In my case, my CLIE just was sitting in Bluetooth Serial Port Connecting... for a long time, then finally appeared to get past that (but probably don't in reality), and then aborted claiming that some other application is using the port. While the CLIE sat in Connecting..., the BT icon on the Mac showed that there indeed was a BT connection. I had checked that the Bluetooth-PDA-Sync port did exist, and even removed all other BT serial ports, just to be sure. No help. If I changed the Bluetooth-PDA-Sync port to be modem instead of RS-232, interestingly the long Connecting... delay disappeared, and the CLIE almost immediately claimed that some other app is using the port. As a final try, prompted by writing the text above, I removed the Bluetooth-PDA-Port completely, using the BT Serial Utility. For some reason, that fixed the problem. Now I can sync over BT. BTW, it works both with the noncompliant and compliant setting. I guess CLIE UX50 is new enough. --Pekka Nikander From pekka.nikander at iki.fi Sat Jul 31 22:51:54 2004 From: pekka.nikander at iki.fi (Pekka Nikander) Date: Sat Jul 31 11:51:56 2004 Subject: [missing-sync-palmos-talk] MS 4.0: Problems with WLAN and USB syncing; BT syncing not working at all In-Reply-To: <04E01CF7-E2C9-11D8-BC79-000393CE1E8C@iki.fi> References: <04E01CF7-E2C9-11D8-BC79-000393CE1E8C@iki.fi> Message-ID: I hate to reply to myself, but... > First, there seems to be some glitch in the Missing Sync > Monitor that sometimes makes it completely unresponsive. This seems to be related to the TCP problems, see below. > Secondly, I seem to get non-deterministic results on syncing > working wrt. the GUI app running. This was apparently just a coincidence, and nothing to be taken seriously. The real problem is in TCP, see below. > After that, and after having had my Mac sleeping overnight, > I was able to perform WLAN hotsync for a number of times > (three or four), but after that it stopped working again. It appears that my Clie drops the WLAN connection before the TCP connection has a chance to do its final handshake. As a result, the TCP connection at the Mac end remains in ESTABLISHED state, for a long time (several minutes). During this time Missing Sync Monitor appears just to be sitting somewhere, perhaps waiting for more data from the PDA, and it does not sync with any means, not even over USB. However, if I terminate synching on the PDA end prematurely, the TCP connection does get closed, or at least the PDA starts TCP close handshake. After that, Missing Sync Monitor is again responsive. > The TCP connection is created (I can verify this with tcpdump > and netstat -an) but syncing doesn't start. My guess is that the Apple library calls the accept system call on another thread so that the TCP connection is correctly created, but Missing Sync Monitor is still waiting for data on the old connection, which the PDA has already abandoned. To me, it looks like that there are at least a few different ways to fix this problem: - Create a separate thread in Missing Sync Monitor for waiting for new synchronisation connections. That would at least respond (and perhaps abandon sync) when the real synchronisation thread is still waiting to receive more data. - In the TCP case, use KEEP_ALIVE with short enough period, maybe 10 seconds? - Make the default synchronisation timeout much shorter than it is now. This may have adverse effects on modem synching, though. --Pekka Nikander From brian_hall at markspace.com Sat Jul 31 13:11:19 2004 From: brian_hall at markspace.com (Brian Hall) Date: Sat Jul 31 12:11:31 2004 Subject: [missing-sync-palmos-talk] Re: [missing-sync-clie-talk] v4 conduit compatibility - WorldMate 2004 from MobiMate In-Reply-To: References: Message-ID: >Have just paid for the upgrade but not yet installed it. > >I have WorldMate installed on my T3 and so far the conduit works pretty >well with HotSync Manager. I would like to know if anyone can confirm >if it also works with MissingSync$ ? I have just sent an email to 2 people at Mobimate that are on a mailing list I subscribe to. Hopefully we should know soon. The master list of conduits we have tested is at: http://www.markspace.com/missingsync_palmos_conduits.html If a conduit is not on the list, that just means we didn't test it (ie, it may work, or may not work). Obviously this list will expand as we hear from more and more conduit developers. Brian -- _____________________________________________________________________ Mark/Space, Inc. voice 408-293-7299 540 N. Santa Cruz Ave. #300 fax 408-293-7298 Los Gatos, CA 95030 From brian_hall at markspace.com Sat Jul 31 13:17:07 2004 From: brian_hall at markspace.com (Brian Hall) Date: Sat Jul 31 12:18:12 2004 Subject: [missing-sync-palmos-talk] Anyone get Vindigo conduit to work? In-Reply-To: References: Message-ID: > >What can we do while waiting for conduit support? I don't want to go >back to HotSync. We are working on it. In the case of Vindigo, we have yet to make contact with someone at Vindigo in engineering. Once we have done that it should be trivial. Brian -- _____________________________________________________________________ Mark/Space, Inc. voice 408-293-7299 540 N. Santa Cruz Ave. #300 fax 408-293-7298 Los Gatos, CA 95030 From brian_hall at markspace.com Sat Jul 31 13:24:07 2004 From: brian_hall at markspace.com (Brian Hall) Date: Sat Jul 31 12:24:10 2004 Subject: [missing-sync-palmos-talk] MacNoteTaker chokes.... In-Reply-To: References: Message-ID: >has anyone else experienced sync failures for MacNoteTaker? The sync >process seems to quit reliably here. Which is a shame as it's my most >important conduit:-) I will preparae a proper bug report for MarkSpace >but wanted to see if there was any difference/similarity out there. We have sent an email to the author. As the web page dates from 2001/2002, let us hope the email address still works. Brian -- _____________________________________________________________________ Mark/Space, Inc. voice 408-293-7299 540 N. Santa Cruz Ave. #300 fax 408-293-7298 Los Gatos, CA 95030 From brian_hall at markspace.com Sat Jul 31 13:30:13 2004 From: brian_hall at markspace.com (Brian Hall) Date: Sat Jul 31 12:30:15 2004 Subject: [missing-sync-palmos-talk] FM sync for Jfile conduit In-Reply-To: References: Message-ID: >that's great news, my fingers are well and truly crossed >thanks for the replies everyone... >incidentally I have since discovered that the Qsync >conduit for Entourage also crashes We have contacted the QueueSync developer. We have worked with him in the past getting his mail conduits to work with our Palm OS mail application. Brian -- _____________________________________________________________________ Mark/Space, Inc. voice 408-293-7299 540 N. Santa Cruz Ave. #300 fax 408-293-7298 Los Gatos, CA 95030 From hflaxman at neb.rr.com Sat Jul 31 17:35:51 2004 From: hflaxman at neb.rr.com (Harry Flaxman) Date: Sat Jul 31 14:36:04 2004 Subject: [missing-sync-palmos-talk] Re: missing-sync-palmos-talk Digest, Vol 14, Issue 12 In-Reply-To: <200407311915.i6VJFD40002565@penguin.markspace.com> References: <200407311915.i6VJFD40002565@penguin.markspace.com> Message-ID: <410C10B7.6010301@neb.rr.com> I purchased the ML4.0 and noticed that it had several different downloads the first time I downloaded it, in one, for my Sony CLIE. Now, there are just two selections and no page to go to to download the palm desktop. Forgive a beginner, but what am I to do at this point? \ Thank you. Harry From brian_hall at markspace.com Sat Jul 31 15:39:55 2004 From: brian_hall at markspace.com (Brian Hall) Date: Sat Jul 31 14:40:09 2004 Subject: [missing-sync-palmos-talk] Re: missing-sync-palmos-talk Digest, Vol 14, Issue 12 In-Reply-To: <410C10B7.6010301@neb.rr.com> References: <200407311915.i6VJFD40002565@penguin.markspace.com> <410C10B7.6010301@neb.rr.com> Message-ID: >I purchased the ML4.0 and noticed that it had several different >downloads the first time I downloaded it, in one, for my >Sony CLIE. Now, there are just two selections and no page to go to to >download the palm desktop. Forgive a beginner, but what am I to do at >this point? As of 4.0, we no longer require/use Palm Desktop - you can continue to use it as a PIM application if you so choose (many instead choose to use iCal/Address or Entourage), but we now use our own HotSync Manager. Brian -- _____________________________________________________________________ Mark/Space, Inc. voice 408-293-7299 540 N. Santa Cruz Ave. #300 fax 408-293-7298 Los Gatos, CA 95030 From jan at flutecake.com Sat Jul 31 19:53:18 2004 From: jan at flutecake.com (Jan Crumpley) Date: Sat Jul 31 15:53:21 2004 Subject: [missing-sync-palmos-talk] Missing Sync will not configure Palm Conduit 1.2 Message-ID: <410C22DE.1040706@flutecake.com> I am new to this list today- because I am not too happy about the Missing Sync purchase unless I can get the iSync going for my iCal & Address Book with my .Mac account. I have: -eMac running 10.2.8 -bluetooth usb doo-hickey -have installed and rerun Missing Sync v4.0 many times in a row today -it does not show the contents on my SD card -installed and see the the conduit for Palm v1.2- however, when I checked the conduit settings, tick the box for enable iSync with Palm device, no more choices ever appear.(see below) -iSync does not see any Palm device -I have a Palm TT3 on v5.2.1 Steps from the software readme... 1) Install Missing Sync for Palm OS Version 4 2) Install the iSync Palm conduit 3) Launch Missing Sync 4) In the Conduits panel, double-click iSync Palm Conduit 5) Select ?Sync this Palm OS Device? ? OK <<<< (stops here-jc) 6) Click the icon associated with your Palm OS device <<(nada) 7) Configure the settings for iCal and Address Book <<(nope) 8) Synchronize What's a geek girl to do? Any tips would be appreciated. From katworley at earthlink.net Sat Jul 31 17:51:29 2004 From: katworley at earthlink.net (Katrina Worley) Date: Sat Jul 31 16:51:36 2004 Subject: [missing-sync-palmos-talk] "failed media" message on sync Message-ID: <8ADDAB0A-E34C-11D8-B59D-003065715492@earthlink.net> I finally managed to get Missing Sync 4 installed and registered (don't ask, it wasn't pretty, and my registration problems had nothing to do with the servers). It appears to be working OK, except that I've gotten a "failed media" message every time I sync with one exception. I don't know what was different about that one time- I thought it was that I had included an e-book to be installed on the memory card, but the next time I did that I got the error again. I can't figure out what the message refers to. Any ideas? I've included the sync log for my most recent sync below. BTW- I'm running OS X.3.4, and syncing to iCal and Apple's address book. I'm not using Palm Desktop at all. Can I trash it now that Missing Sync is using it's own version of a hotsync manager? Thanks- Katrina Sync starting at 7/31/04 4:33 PM on USB OK Install 7/31/04 4:33 PM iSync Conduit starting 7/31/04 4:34 PM Setting Hello Response, type is PalmSyncTypeFast, language is 0 (BladeLanguageEnglish) OK iSync Conduit OK Memo Failed Media (0x4003) OK Note Pad Beginning Pocket Quicken 2.0 Sync OK Pocket Quicken 2.0 TimeCopy: host 2004/07/31 16:38:54, palm 2004/07/31 16:37:26, diff: 88s OK TimeCopy OK Documents To Go OK Install Backed up DatebookDB.pdb Backed up MemoDB.pdb Backed up PQKN-Accounts.pdb Backed up PQKN-Transactions.pdb Backed up PQKN-Lists.pdb Backed up PQKN-Memorized.pdb Backed up Palm Reader Preferences.pdb Backed up Saved Preferences.prc OK Backup Sync completed successfully at 7/31/04 4:40 PM From laudema at free.fr Wed Jul 7 00:11:30 2004 From: laudema at free.fr (LD) Date: Fri May 6 12:02:49 2005 Subject: [missing-sync-palmos-talk] test and talk treo behind mac, mac behind router Message-ID: <0CFB7824-CF91-11D8-A42D-000393A95684@free.fr> Hello, Seems to be a quiet list :-) Trying to share my internet connection on the mac (G4, mac os 10.3.4) and a few softwarres running together usually nicely .. Share does not work, and it screws up the treo, that was yesterday. Today mac shows me an advice to restart my computer by holding the power key for a long time. What i did ... Back to the mac I went to the console.app, and found there things that could explain some troubles in the start log : > Jul 6 22:31:36 localhost SystemStarter: Demarrage des services > internet > Jul 6 22:31:36 localhost ConsoleMessage: Starting Internet address > sharing > Jul 6 22:31:36 localhost SystemStarter: Starting Internet address > sharing > Jul 6 22:31:36 localhost InternetSharing[357]: InternetSharing > starting > Jul 6 22:31:36 localhost xinetd[352]: attribute disable expects 1 > values and 4 values were specified [line=4] > Jul 6 22:31:36 localhost xinetd[352]: attribute user expects 1 values > and 4 values were specified [line=7] ? > Jul 6 22:31:36 localhost xinetd[352]: Service tftp missing attribute > user - DISABLING tftp I installed for another thing ... > Jul 6 22:31:36 localhost xinetd[352]: xinetd Version 2.3.11 started > with libwrap options compiled in. > Jul 6 22:31:36 localhost xinetd[352]: Started working: 5 available > services > Jul 6 22:31:36 localhost named[359]: starting BIND 9.2.2 -c > /etc/com.apple.named.conf.proxy -f > Jul 6 22:31:36 localhost named[359]: using 1 CPU > Jul 6 22:31:36 localhost bootpd[358]: interface en0: ip > 192.168.123.100 mask 255.255.255.0 > Jul 6 22:31:36 localhost bootpd[358]: interface fw0: ip 192.168.2.1 > mask 255.255.255.0 > Jul 6 22:31:37 localhost named[359]: loading configuration from > '/etc/com.apple.named.conf.proxy' > Jul 6 22:31:37 localhost named[359]: listening on IPv4 interface fw0, > 192.168.2.1#53 > Jul 6 22:31:37 localhost named[359]: none:0: open: > /private/etc/rndc.key: file not found could it be there the trouble ? > Jul 6 22:31:37 localhost named[359]: > /etc/com.apple.named.conf.proxy:7: couldn't install keys for command > channel 127.0.0.1#54: file not found > Jul 6 22:31:37 localhost named[359]: > /etc/com.apple.named.conf.proxy:7: couldn't add command channel > 127.0.0.1#54: file not found > Jul 6 22:31:37 localhost named[359]: zone 0.0.127.in-addr.arpa/IN: > loaded serial 1997022700 > Jul 6 22:31:37 localhost named[359]: zone localhost/IN: loaded serial > 42 > Jul 6 22:31:37 localhost named[359]: running > Jul 6 22:31:37 localhost SystemStarter: The following StartupItems > failed to properly start: > Jul 6 22:31:37 localhost SystemStarter: > /System/Library/StartupItems/CrashReporter > Jul 6 22:31:37 localhost SystemStarter: - execution of Startup > script failed I don't know much about that CrashReporter, will have to see that tomorrow .. > Jul 6 22:31:37 localhost SystemStarter: > Jul 6 22:31:37 localhost SystemStarter: Demarrage de la fenetre > deouverture de session About the treo side it is rather curious : everything seems to start fine, hands shake strongly, I got an IP adress 192.168.206.206 with a gateway at the known mac IP adress 192.168.123.100 and there is a service open named MissinSync. Everything's all right. But it does not works : Connection won't be establish with the pop server neither with the web-server (white page in the browser). Yesterday I got once the page of the router on the lan at 192.168.123.254, but no more. The odd thing is that today I connected through my GPRS connection. It started fine as well and died the same bad way : connected with an IP adress, but unable to get any service. And that time it's no more MissingSync fault. But the only way I know to make things work again is to do a hard reset. Because I did one yesterday morning, after my first tries .. And will do until tomorrow morning again ... I had one mail with Pete but it did not helped me very much, I send him the screen shots of internet sharing preferences ... For my point of view they looked fine, he did not say ... If some body on this peacefull list as an idea ? Thanks in advance Laurent Demaret -- laudema@free.fr From rapsfo at yahoo.com Tue Jul 13 03:30:13 2004 From: rapsfo at yahoo.com (Rob Petsche) Date: Fri May 6 12:02:49 2005 Subject: [missing-sync-palmos-talk] request for link to version 2.01 Message-ID: <20040713093013.32277.qmail@web41505.mail.yahoo.com> I am running Palm OS 5.2, connecting via HotSync Manager V3.1, isync V1.4, using a treo 600 and running Mac OS 10.2.8. I cannot mount the SD card from my Treo to my desktop. What steps should I consider when solving this problem. Regards, Robert From ramadonjoe at comcast.net Tue Jul 13 10:24:25 2004 From: ramadonjoe at comcast.net (Len McCawley) Date: Fri May 6 12:02:49 2005 Subject: [missing-sync-palmos-talk] request for link to version 2.01 In-Reply-To: <20040713093013.32277.qmail@web41505.mail.yahoo.com> Message-ID: Hi, i am no expert, but hopefully this may help. Which missing sync application are you using? I think there are different application for different functions, one to surf the web/ use advantgo, another application to mount the card to the desk top. lenny On Tuesday, July 13, 2004, at 05:30 AM, Rob Petsche wrote: > > I am running Palm OS 5.2, connecting via HotSync > Manager V3.1, isync V1.4, using a treo 600 and running > Mac OS 10.2.8. I cannot mount the SD card from my Treo > to my desktop. What steps should I consider when > solving this problem. > > Regards, > > Robert > > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > Unsubcribing information, subscription options and list archives can > be found at: > http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk > From kfreeman at markspace.com Tue Jul 13 12:17:58 2004 From: kfreeman at markspace.com (Ken Freeman) Date: Fri May 6 12:02:49 2005 Subject: [missing-sync-palmos-talk] request for link to version 2.01 In-Reply-To: References: Message-ID: There is a known bug mounting cards with the Missing Sync version 2.0.2 on mac OS 10.2.8. Robert has been sent a link to download the 2.0.1 version, which works fine with Mac OS X 10.2.8. Ken On Jul 13, 2004, at 6:24 AM, Len McCawley wrote: > Hi, i am no expert, but hopefully this may help. Which missing sync > application are you using? I think there are different application for > different functions, one to surf the web/ use advantgo, another > application to mount the card to the desk top. > lenny > On Tuesday, July 13, 2004, at 05:30 AM, Rob Petsche wrote: > >> >> I am running Palm OS 5.2, connecting via HotSync >> Manager V3.1, isync V1.4, using a treo 600 and running >> Mac OS 10.2.8. I cannot mount the SD card from my Treo >> to my desktop. What steps should I consider when >> solving this problem. >> >> Regards, >> >> Robert >> >> _______________________________________________ >> missing-sync-palmos-talk mailing list >> missing-sync-palmos-talk@lists.markspace.com >> Unsubcribing information, subscription options and list archives can >> be found at: >> http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk >> > > _______________________________________________ > missing-sync-palmos-talk mailing list > missing-sync-palmos-talk@lists.markspace.com > Unsubcribing information, subscription options and list archives can > be found at: > http://lists.markspace.com/mailman/listinfo/missing-sync-palmos-talk > From joshjustice at comcast.n